Home > SASWELL > SASWELL SAS919WHB-0 Thermostat User Manual

SASWELL SAS919WHB-0 Thermostat User Manual

Advanced thermostat settings  
You can set the temperature limits, heating mode temperatures, hysteresis, etc.  
To access advanced thermostat settings, you have to turn the thermostat off, by holding the middle menu button for 3  
seconds. When the thermostat is OFF and the display is not showing anything, you have to hold the middle menu  
button for 3 seconds. Now, the display should turn on and you should see the first set value and on the bottom of the  
screen a number “1”, which lets you know, that you’re changing the settings for the first step (check the table below).  
You can change the settings by pressing + or and move to the next setting by pressing the middle menu button. Any  
changes made are automatically saved if you don’t press anything for 8 seconds.  
Step  
Factory  
default value  
30.0°C  
Setting  
options  
20.0°C –  
35.0°C  
05.0°C –  
20.0°C  
10.0°C –  
20.0°C  
20.0°C –  
Description  
1
2
3
4
Here you can set the highest working room temperature for heating.  
Here you can set the lowest working room temperature for heating.  
05.0°C  
16.0°C  
21.0°C  
Lower, Night mode temperature this temperature is used when you’re  
using the Night mode, for example, at night or when you’re away.  
Higher, Day mode temperature  
using the Day mode, for example, during the day or when you’re at home.  
this temperature is used when you’re  
25.0°C  
24  
GeneralDetails
NameSASWELL SAS919WHB-0 Thermostat User Manual
MakeSASWELL
LanguageEnglish
FiletypePDF (Download)
File size0.36 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
SASWELL T11FHL Heated Floor Thermostat User Manual
SASWELL T11FHL Heated Floor Thermostat User Manual
SASWELL SAS908XWHB-7 Thermostat User Manual
SASWELL SAS908XWHB-7 Thermostat User Manual

SASWELL SAS919WHB-0 Thermostat User Manual