SALUS RT520TX Thermostat User Guide
RT520TX Thermostat Pairing with the Receiver
14
15
16
Standard Power Up and Configuration
Landlord Settings
If you are using the RT520RF pack, the pairing between the thermostat and the receiver is already
done. During the pairing process, please make sure the thermostat and the receiver are at least 1
meter from each other.
Please follow steps 1 to 17 from section OpenTherm Power Up and Configuration.
1
Landlord settings is a pin code protected feature that allows the landlord to set a service reminder on the
thermostat that will warn the tenant when the boiler is due its annual service.
NOTE: Using UP or DOWN, you can choose either TPI (step 2) or SPAN (step 6). Choosing one
option excludes the other.
If you bought the RT520TX and RXRT520 separately or if you want to re-pair thermostat with the
receiver, make sure that the device is disconnected from the power supply and the switches on the
receiver have been set to AUTO and ON. Then connect the receiver to the power supply and wait for
the red LED to light steadily. Then switch to the OFF position and again to ON position quickly. The red
flashing LED will confirm entering the pairing mode.
2
TPI (Time Proportional
&
Integral) is
a
self-learning, time-
Using UP or DOWN,
select ON or OFF.
Press SELECT to confirm.
The thermostat will go to
the main screen.
proportional algorithm. TPI type of regulation ensures economical
system operation through more accurate temperature maintenance
during controlling process and limits overload conditions. In addition
to the exact and stable room temperature, the advantage of this
system is the minimization of energy consumption and significant
savings. RT520 offers 3 types of TPI control: 1. for radiator (6CPH); 2.
for underfloor heating (3CPH); 3. for electric heating (9CPH).
1
2
3
3
1
2
Programming - Automatic Mode
The schedule has 6 time intervals for which different temperatures can be adjusted. You can set 2,
3 or up to 6 temperatures per day. You must define all time periods. Here is an example of setting a
certain time with a certain temperature.
Press SELECT.
4
5
6
1
2
4
7
3A
Press MENU.
Using UP or DOWN, navigate to
Landlord submenu
and press SELECT.
Using UP or DOWN, enter the PIN
code number. Press SELECT to
confirm every digit.
3
4
5
4
5
6
Press MENU.
Using UP or DOWN, navigate to
Pairing submenu and press SELECT.
Using UP or DOWN, select PAIR
and press SELECT.
Press MENU.
Press SELECT.
Using UP or DOWN, select the
program type between: 5
Using UP or DOWN, select the TPI type you want to use.
Press SELECT to confirm.
7
8
9
3B
5
Press SELECT.
Using UP or DOWN, select ON
and press SELECT.
Using UP or DOWN, select the due
date and then press SELECT.
Span is the difference between the measured temperature and the set temperature.
6
7
8
ON
OFF
7
8
9
AUTO
MANUAL
The pairing process takes
up to 10 minutes.
Once devices are successfully
paired, LED on the receiver
will go solid red.
After all, thermostat will go back
to the main screen.
+2 (schedule for the working days
and for the weekend);
All (set one schedule for
the entire week)
Individual (set a daily schedule).
Press SELECT to confirm.
6
8
Test the Pairing Process
Press SELECT.
Using UP or DOWN, select the
Span value.
Press SELECT to confirm.
1
2
3
Using UP or DOWN, select
the warning period and
then press SELECT.
Using UP or DOWN, select the
lock temperature and
then press SELECT.
Press SELECT.
Optimum Start is a selectable function which, depending on the ambient room temperature, will start the boiler
operation at the optimum time to achieve the set-point temperature. It saves energy by only firing the boiler
for the minimum required time.
10A
10B
9
Using UP or DOWN, set the hour
and then press SELECT.
Using UP or DOWN, set the
minutes and then press SELECT.
Using UP or DOWN, set the
temperature and then
press SELECT.
10
11
12
Press MENU.
Using UP or DOWN, navigate to
Pairing submenu and press SELECT.
Using UP or DOWN, select
TEST and press SELECT.
Repeat the process for all time periods.
Now you can check your
settings. If you want to
make a change, press UP
or DOWN on the relevant
screen.
4
5
If you do not want to use the 6 temperature intervals / day (ex: 1 eco, 2 comfort), please see below
how to delete one or more intervals.
Press SELECT.
Press SELECT.
11
12
ON
OFF
Using UP or DOWN, enter the
phone number. Press SELECT to
confirm every digit.
AUTO
MANUAL
The testing process takes
up to 10 minutes.
The red LED and the green
LED on the receiver
will begin to flash.
Press the UP arrow on the interval
at which you want to remove the
temperature, until lines appear
When lines appear, press SELECT
to confirm the removal of that
specific interval
Factory Reset
13
14
15
1
2
Using UP or DOWN,
select ON or OFF.
Press SELECT to confirm.
6 temp / day 2 temp / day
- eco -
TIME:
- comfort -
13A
13B
This is an example for your weekly
schedule. High temperature should
be used for the ON times and low
temperature for the OFF times.
Optimum Stop calculates how
06.00
10.00
12.00
14.00
18.00
21.00
21 °C
21 °C
long the house will take to cool
down, then turns off the boiler at
the earliest possible moment, this
means the system is not running
when it’s not actually necessary. If
there is a sudden heat loss during
this period, then Optimum Stop will
be overridden to regain comfort
conditions.
14 °C
21 °C
14 °C
21 °C
14 °C
-
-
-
To reset the thermostat, press MENU,
DOWN and BOOST simultaneously
for 5 seconds.
The device will be reset and will
start up automatically.
Once service mode has become active, the device will lock the set point temperature as set
by the installer/landlord. To unlock this device, the landlord needs to be contacted and the
boiler serviced.
-
14 °C
Press SELECT.
Landlord settings will not be reset.
| General | Details |
|---|---|
| Name | SALUS RT520TX Thermostat User Guide |
| Make | SALUS |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.9 MB |
(1 votes, average: 5.00 out of 5)
Loading...
SALUS IT800 WIFI Smart Thermostat Installation Guide
SALUS 091FLRF Wireless Room Thermostat User Guide
SALUS Thermostat Sensor TS600 User Guide
SALUS Thermostat and Smart Plug Installation Guide
SALUS Programmable Wired Thermostat VS30W/VS30B Installation Guide
SALUS Wired Thermostat Installation Guide
SALUS Wired Digital Thermostat – Non-programmable HTRS230 User Manual
SALUS RT520 Radiator Thermostat User Guide
SALUS RT310 Thermostat User Manual
SALUS Thermostat RT520 User Manual
ENGO CONTROLS E10-MBUSW, E10-MBUSB Wi-Fi MODBUS Thermostat User Guide
BOSCH Smart Home Room Thermostat Instruction Manual
ESP ECSPST Fort Programmable Thermostat User Manual
emos P56201 Digital Room Thermostat User Manual
Danfoss 088U0210 CF-RS Standard Room Thermostat Instruction Manual
Beca BHT-002 Electric Heating Wifi Thermostat User Guide
Drayton Wiser Smart Room Thermostat Instruction Manual
ECSPST Fort Programmable Thermostat User Guide
ZoneFirst Invis-A-Stat Smart Light Switch Thermostat User Guide
GENERAL LIFE NORA 270S RF Wireless Room Thermostat User Manual