Home > NEOMITIS > NEOMITIS PRG7 RF 7 Day Two Channel Programmer with RF Room Thermostat Instruction Manual
NEOMITIS PRG7 RF 7 Day Two Channel Programmer with RF Room Thermostat Instruction Manual
2- Aſter 2 seconds, the LCD will show:
- The default ꢁme and day
- Run icon solid
2- Within 1 minute, press and hold the RF Test
buꢀon on the thermostat unꢁl PAir is shown
in the display (approx. 5 seconds). The pairing
Icon will be flashing.
- CH and HW systems are OFF
- RF icon flashes
Note: A low baꢀery level indicator
w
i
l
l
a
p
p
e
a
r
i
n
t
h
e
d
i
s
p
l
a
y
w
h
e
n
t
h
e
b
a
ꢀ
e
r
y
m
u
s
t
be changed.
Programmer baꢂery
access
5 sec
3- Programmer and Thermostat RF icon will be solid when pairing is complete and
normal display is returned.
Note: the programmer is usually located near your
boiler. If you want to check the signal strength,
press and release the RF test buꢀon on the ther-
mostat. RF icon blinks for 10 seconds then signal
strength appears. 10 is the best signal strength.
Remember to take used baꢀeries to a baꢀery collecꢁon point so they can be recycled.
• Thermostat
1- To start: insert the two AA baꢀeries
provided into the baꢀery compart-
ment.
2- Aſter 2 seconds, the LCD will show:
- The ambient temperature (°C) solid.
PROGRAMMING
Note : The PRG is already set with correct date and ꢁme. Should programmer need
- The icon is solid when the heaꢁng
is turned ON.
Once baꢀeries are fiꢀed all symbols
will be displayed on the LCD screen as
shown for two seconds.
- The setpoint temperature (°C) solid.
reseꢁng for any reasons, please see instrucꢁons on page 4.
- RF icon flashes.
SET THE CH/Z1 AND HW/Z2 PROGRAMMING
1- Move the Programming slider to posiꢁon
.
All days of week are solid. Underscore and Yes/
No are flashing.
2- Press
if you want to set an other
day of the week. Underscore moves
under the other days. Then press
to program the underscored day.
3- Press or to increment/decre-
ment the first On/Off period start
ꢁme.
Note: When the baꢀeries must be changed, a low baꢀery level indicator appears on the
device.
Then press
to confirm.
Remember to take used baꢀeries to baꢀery collecꢁon points so they can be recycled.
- Installing baꢂeries
1- Remove the baꢀeries
cover which is placed
on the front of ther-
mostat.
2- Insert the 2 baꢀeries AA 3- Replace the baꢀeries
supplied. Note the cor-
rect polarity according
to the engraving on the
thermostat when inser-
ꢁng the baꢀeries.
cover.
4- Press or to increment/decre-
ment the first On/Off period end
ꢁme.
5- Repeat for the second On/Off period
and for the third On/Off period.
(Please refer to the advanced installer
seꢂngs on Installaꢁon instrucꢁon to
enable the third On/Off period).
Then press Yes to confirm.
PAIRING PROCEDURE
The thermostat and the programmer are not bonded together at the factory.
To bond the thermostat and the programmer together, proceed as below:
1- Move the 2 mode sliders on both sides of the
programmer to the OFF posiꢁon and then
move the program slider to the RUN posiꢁon.
Once this is done, press and hold the RF
test buꢀon unꢁl Pair is shown in the display
(approx. 5 seconds). The pairing icon will be
flashing.
On/Off periods
Default schedule
Two On/Off periods seꢂngs
Start at 06:30 am
Start at 05:00 pm
Period 1
Period 2
End at 08:30 am
End at 10:00 pm
Three On/Off periods seꢂngs
Start at 06:30 am
Period 1
Period 2
Period 3
End at 08:30 am
End at 02:00 pm
End at 10:00 pm
Start at 12:00 pm
Start at 05:00 pm
5 sec
2
| General | Details |
|---|---|
| Name | NEOMITIS PRG7 RF 7 Day Two Channel Programmer with RF Room Thermostat Instruction Manual |
| Make | NEOMITIS |
| Language | English |
| Filetype | PDF (Download) |
| File size | 2.63 MB |
(1 votes, average: 5.00 out of 5)
Loading...
NEOMITIS RTE7OTA Wired Digital 7 Day Programmable Smart Room Thermostat Instruction Manual
Neomitis RTMA Mechanical Room Thermostat Instruction Manual
NEOMITIS RTE7D, RTE7BD Wired Digital 7 Day Programmable Room Thermostat Instruction Manual
NEOMITIS Rtaneoa Wired Analog Room Thermostat Instruction Manual
NEOMITIS RTE7SD Mains Powered Digital 7 Day Programmable Room Thermostat Instruction Manual
NEOMITIS RTE0B Wired Digital Room Thermostat Installation Guide
NEOMITIS RTE0RFA Wireless Digital Room Thermostat and Receiver Instruction Manual
NEOMITIS RTUa Mechanical Room Thermostat Instruction Manual
TCL IPOWER Heat Mat Thermostat Instruction Manual
GENERAL LIFE FH104S Underfloor Heating Thermostat User Manual
SIEMENS RDF660MB Flush Mount Room Thermostat Instruction Manual
ideal HEATING HALO LITE Room Thermostat User Guide
vtech T961NN50 Amana Wired Thermostat User Guide
eve thermo 22088 Eve Radiator Thermostat User Manual
GENERAL HT100S Digital Room Thermostat User Manual
BOSCH BCC110 Connected Control Thermostat Instruction Manual
GE Programmable CYNC Smart Thermostat User Guide
STIEBEL ELTRON FEB 2.1 Programming Thermostat Installation Guide