MOES ZTRV-BY-100 Radiator Thermostat User Guide

1

2

HOME,SMART MOES HOME  

5. Lock your Radiator  

Press the “+” and “- ” keys together for 3 seconds to lock or  

unlock the keys.  

Step 2: Install the adapter.Install the adapter on your valve  

as the picture below. If you don’t need an adapter, please  

ignore this step.  

Step 5: Connect the thermostat and the mounting board  

When “F1" stops flashing, find the “mark point" of the  

thermostat, shown Fig. 1.Turn clockwise to complete the  

connection between the thermostat and the mounting plate.  

FEATURES  

HOME SCREEN QUICK REFERENCE  

Week  

ZTRV- BY- 100 Radiator Thermostat(TRV)  

User Guide  

1. LED display, no window, wider perspective  

2. Colorful display  

3. Graceful arc waist shape  

4. Rubber stretch paint, feel like baby skin  

5. Night Halo colors your home  

6. Low power consumption,battery can last 1 year for normal  

use and standby for 2 years.  

7. Low battery tip  

8. Diagram of temperature curve added in APP  

9. Vary colors are available like white, Black, gray etc.  

6. Low voltage reminder  

When the voltage is lower than 1.8V, the screen will display  

After clicking the  

(only once), the thermostat will display  

Low temp.  

protection  

Holiday mode  

Minute  

Hour  

Valve open  

Error warning  

Battery reminder  

Zigbee  

.

“F2". When “F2 ”disappears, while the screen remains on,  

turn the thermostat clockwise to adjust the screen to your  

liking direction.  

7. Boost heating  

Press and hold “+” for 3 seconds, the device will enter the  

Key lock  

Room temp.  

Energy saving mode  

Set temp.  

Open window  

RA  

RAV  

Comap  

Installation finished.  

boost heating mode, and the  

will be displayed in the APP.  

will flash.The countdown  

temp.display  

Manual mode  

Programming  

mode  

OPERATION  

IN THE BOX YOU WILL FIND  

1. Power: After installing the battery, it will automatically turn  

on. It can't be turned off till the battery is removed.  

When the TRV is turned on, it will enter the self- check  

program, and all icons will be displayed firstly.  

8. Adjusting/ Setting the Programmable Schedules  

Method one;  

Raditor Thermostat  

User Guide  

RA Adapter  

1pc  

1pc  

1pc  

1pc  

1pc  

1pc  

1set  

1pc  

Special note: The Zigbee version of  

the temperature control valve should  

be used with a Zigbee gateway com-  

patible with “MOES”.  

The package does not include the  

battery and gateway.  

Up  

Down  

Manually set a week of programming settings, specific  

operations are as follows:  

menu  

ZTRV- BY- 100- MS- DC05  

Zigbee Type  

TECHNICAL DATA  

Power Supply: 3 V,2xAA Batteries, Packaging not have battery.  

Maximum stroke: 4.5mm  

Accuracy: 0.5°C  

Set Temp. Range: 5~45 °C  

Display temp. Range: 0~70°C  

Ambient Temp.: 0 ~ 45 °C  

Ambient Humidity: 5 ~ 95 % RH (Non Condensing)  

Storage Temp.: - 5~ 45 °C  

Timing Error: < 1%  

RAV Adapter  

Press  

temperature control valve is shrinking; when “F1" stops  

flashing, press again,  

, the screen flashes “F1", indicating that the  

RAVL Adapter  

Comap Adapter  

T+A Herz Adapter  

Herz Adapter  

For other languages,please scan the following QR code  

Method Two;  

Use APP for one week of programming settings, please refer  

to the second page “Programming your Radiator"  

RAVL  

T+A Herz  

Bitte scannen Sie den QR- Code, um das deutsche  

Handbuch, das Installationsvideo und die Funktionsein-  

führung zu erhalten  

Escanee el código QR para obtener el manual en español,  

el video de instalación y la introducción de la función  

Veuillez scanner le code QR pour obtenir le manuel en  

français, la vidéo d'installation et l'introduction des  

fonctions  

Отсканируйте QR-код, чтобы получить руководство на  

русском языке, видео по установке и описание функций  

Scansionare il codice QR per ottenere il manuale in italiano,  

il video di installazione e la guida alle funzionalità. Video di  

installazione e funzionalità  

Leia o código QR para obter o manual em português, o  

vídeo de instalação e a introdução das funções  

Zeskanuj kod QR, aby uzyskać instrukcje, filmy instalacyjne  

i funkcje  

The screen displays “F2",Indicates that the temperature  

control valve is measuring.; when the screen displays the  

room temperature, it indicates that the temperature control  

valve has completed the stroke measurement, and you can  

start using the temperature control valve normally.  

Step 3: Install the thermostat mounting plate.Remove the  

mounting plate of the thermostat (Part 1 in the picture below)  

counterclockwise.  

Manual editing:  

APPLICATION  

Press and hold  

numbers on the screen, press  

for 3 seconds. When you see the flashing  

4 times to skip the clock  

setting. When the screen displays “①②③④⑤" (means  

2. Mode selection  

Press  

modes.  

Monday to Friday), flashing numbers and “h”, you can set the  

to switch between manual, programming, vacation  

Protection Class: IP 20  

hour with “+” and “- ”; press  

again, flashing numbers and  

Buttons: Capacitive Touch Buttons  

Frequency Band: 2.405- 2.480GHz  

Maximum Radio Transmit Power: <+10dBm  

“m", you can use “+” “- ” Set the minutes; press  

again,  

Manual mode - In this mode, the device executes manual  

temperature setting. When the set temperature is lower than  

the"minimum temperature", the valve is closed (forced closed);  

Programming mode - In this mode, the device executes a  

preset week programming temperature time and temperature;  

the screen displays “Set", and the temperature can be set by  

“+” “- ”. This completes the setting of the programmed  

temperature for one week in the morning from Monday to  

Friday.  

Before installing  

To avoid damages to the product during installation,please  

read the manual carefully before installing TRV .  

Part 1  

By analogy, refer to the one- week programming temperature  

default table to complete one- week programming settings.  

Holiday mode  

- In this mode, for example, the vacation  

mode is set for 10 days and the temperature is set to 15  

degrees Celsius. After 10 days, the device will automatically  

switch to programming mode;  

Follow the instructions in  

the figure below to install  

the mounting plate on the  

valve. Pay attention to the  

red label in the picture.  

DIMENSION  

INSTALLATION  

52.0  

Step 1: Select the adapter.TRV is usually connected with  

M30*1.5mm valve. If you have different valves, please  

determine your valve type according to the picture below,  

and choose the correct adapter from the package. If you do  

not find the valve that matches your use in the picture below,  

please buy it carefully.  

8. Programming setting  

Unit: mm  

48.5  

Temporary manual mode - In this mode,  

icon will flash. At  

MON.- FRI.  

this time, the device executes the manually set temperature  

and returns to the weekly programming mode in the next time  

period.  

SAT.  

SUN.  

(①②③④⑤ shows on  

scteen)  

Time  

(⑥shows on scteen)  

(⑦shows on scteen)  

display  

TIME  

TEMP.  

TIME  

TEMP.  

TIME  

TEMP.  

Fig. 1  

3. Set the temperature  

Press “+”/ “- ” key to adjust the temperature  

Period 1 6:00~11:30  

Period 2 11:30~13:30  

Period 3 13:30~17:30  

Period 4 17:30~6:00  

20  

21  

22  

23  

6:00~12:00  

12:00~14:30  

14:30~17:30  

17:30~6:00  

24  

23  

22  

21  

6:00~12:30  

12:30~14:30  

14:30~18:30  

18:30~6:00  

19  

20  

21  

20  

71.5  

Step 4: Install battery  

请扫描二维码获取中文的说  

明书、安装视频及功能介绍  

4. Set the clock  

85.0  

Follow the picture below to install the  

battery in the correct direction. After  

the battery is installed correctly, the  

thermostat will be turned on. At this  

Press and hold  

and numbers, indicating that the hour is being set, set the  

hour by press “+” / “- ” keys; press again, the screen will  

for 3 seconds, the screen will display “h”  

Welcome  

9. Setting the Functions and Options  

Press and hold the “- ” and 3 seconds together , entering  

into the advanced option settings. The screen displays “A1"  

(function), after 2 seconds, the number (settings and options)  

will display, and the options can be set by the “+” / “- ” key.  

Thank you for your purchase. MOES always made  

high- quality products with our high- end technology,  

high- quality craftsmanship, safe and reliable materials.  

The new radiator thermostat will bring you a more  

comfortable smart life .  

display “m”, indicating that the minute is being set, press “ +”  

/ “- ” keys to set the minutes; press again, the screen will  

display “number”, indicating that the day of the week is being  

set, and the day of the week can be set by “ +” / “- ” ;press  

again, the screen will flash “number, h, m", indicating that the  

number of days in the vacation mode is set, which can be set  

by the “+” and “- ” keys;  

time, click the  

(only once),  

the thermostat will display and flash  

“F1", when the “F1" stops flashing,  

the thermostat motor It will all  

shrink to facilitate the connection of  

the thermostat and the mounting plate.  

Please read this installation/ programming manual for  

installing and operating. Please also make sure someone  

qualified to install the radiator .  

M30*1.5  

53.0  

Comply with all local regulations.  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	MOES ZTRV-BY-100 Radiator Thermostat User Guide
Make	MOES
Language	English
Filetype	PDF (Download)
File size	1.34 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• MOES

MOES ZTRV-BY-100 Radiator Thermostat User Guide Overview

Summary of Contents

• Page 1: HOME, SMART MOES HOME Lock your radiator by pressing the “+” and “-” keys together for 3 seconds. Install the adapter on your valve as shown in the picture. If you don’t need an adapter, please ignore this step. Connect the thermostat and the mounting board by turning clockwise to complete the connection. Features include a colorful display, low power consumption, and various color options. The screen will display a low battery tip when the voltage is lower than 1.8V. Press and hold “+” for 3 seconds to enter boost heating mode. The device executes manual temperature setting in manual mode. Before installing, read the manual carefully to avoid damages. The package includes a radiator thermostat and various adapters. Follow the instructions to install the mounting plate on the valve.
• Page 2: To find out where these collection points are and how they work, contact the installer or your local authority. Moes application is much more compatible than Tuya smart/smart life application. It also provides a new customized service for controlling scenes through Siri, widgets, and scene recommendation. According to the temperature graph, you can understand the temperature change in the past time. Open window detection checks whether the room temperature is lower than the previous detection. Thank you for your trust and support to our products; we will provide you with a two-year worry-free after-sales service. If the product is damaged due to personal reasons, a certain amount of maintenance fee shall be charged for repair. We have the right to refuse to provide warranty service if products are damaged, disassembled, or modified. The full text of the EU declaration of conformity is available at the following internet address. Common abnormity and processing method include solutions for various error reminders. All products marked with the symbol for separate collection of waste electrical and electronic equipment must be disposed of separately from unsorted municipal waste.