Home > Midea > Midea KJR-29B-BK-E Wireless Thermostat Instruction Manual

Midea KJR-29B-BK-E Wireless Thermostat Instruction Manual

R410A DC Inverter V4 Plus 50Hz  
MCAC-VTSM-2013-03  
(5)Temperature setting  
Under AUTO, COOL, DRY, HEAT modes, press the Temp adjust Up/Down buttons to set the temperature, the  
adjusting range is 17~30(or 62~88). The setting temperature cannot be adjusted under FAN mode.  
(6)Timer on and Timer off setting  
Press the timer/clock setting button, then enter into the timer on setting status, and the screen will display timer  
icon  
and  
.
You can press Temperature setting buttons to adjust the time. When the time setting is less than 10 hours,  
each press the Temp setting buttons will increase or decrease 0.5 hour. When the timer setting is more than  
10 hours, each press Temp setting buttons will increase or decrease 1 hour, the maximum timer setting is 24  
hours. After finish adjusting the time on setting, press the 26/OK button or wait for 5 seconds to confirm and  
exit the time on setting.  
Notes: If the wired remote controller has been set timer on/ off, press the ON/OFF button to turn on/ turn off the unit then the  
timer will be canceled simultaneously.  
(7) Clock setting  
Long press the timer/clock setting button for 3 seconds, and then enter into the clock setting status. The hour  
position of the clock will flash, and can press Temp setting buttons to adjust the hour value.  
After finish the hour setting, press left button or right button to switch to minute position setting, then the minute  
position will flash, press Temp setting buttons to adjust the minute value. After finish the clock setting, press  
the button or wait for 5seconds to confirm and exit the setting state.  
(8)26/OK button  
Under AUTO, COOL, DRY, HEAT modes, press the 26/OK button can set the operating temperature to 26.  
Long press this button for 3 seconds, the wired controller will lock the setting temperature to 26, and the  
locking icon will be lighted up. Under the 26operation locking state, the wired controller cannot adjust the  
setting temperature through the temperature setting buttons, and also will not respond to the temperature  
adjusting instruction from the wireless remote controller.  
Long press 26/OK button for 3seconds, can unlock the 26operation locking state.  
(9) Wired controller locking  
Press the temperature adjusting UP and DOWN buttons simultaneously, the wired controller enters into  
locking state, and the locking icon will be lighted up. Under the locking state, the wired controller will not  
respond to buttons by pressing and the control instruction from the wireless remote controller. Simultaneously  
press temperature adjusting buttons again can cancel the locking state.  
(10) Air filter cleaning reminding function  
The wired controller records the total running time of the indoor unit, when the accumulated running time  
reaches the pre-set value, air filter cleaning reminding icon will be lighted up, to remind that the air filter of the  
indoor unit needs to be cleaned. Long press left button for 3 seconds, and clear the reminding icon and the  
wired controller will re-accumulate the total running time of the indoor unit.  
Notes: The default setting value of reminding function is 2500 hours, and it can change to be 1250 hours, 5000 hours or 10000  
hours. The setting methods please refer to the installation manual.  
(11)Swing Function  
If the indoor unit supports swing function, press the right button to adjust the air outlet direction of the indoor  
unit. Long press this button for 3 seconds can turn on or turn off the auto-swing function. When the auto-swing  
Control system  
GeneralDetails
NameMidea KJR-29B-BK-E Wireless Thermostat Instruction Manual
MakeMidea
LanguageEnglish
FiletypePDF (Download)
File size0.33 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

Midea KJR-29B-BK-E Wireless Thermostat Instruction Manual