Midea KJR-29B-BK-E Wireless Thermostat Instruction Manual
R410A DC Inverter V4 Plus 50Hz
MCAC-VTSM-2013-03
2) Use three GB950-86 M4X20 screws to directly install the back cover on the wall.
Screw hole installed on
the wall,use three
GB950-86 M4X20
3) Use two M4X25 GB823-88screws to install the back cover on the 86 electrician box, and use one GB950-86
M4X20 screw for fixing the wall.
Screw hole fixed on
Screw hole installed
the wall,use one
on 86 Electrician box,
GB950-86 M4X20
use two M4X25
GB823-88
4) Adjust the length of two plastic screw bars in the accessory to be the standard length from the electrical box
screw bar to the wall. Make sure when install the screw bar to the electrical box screw bar, make it as flat as
the wall.
86 Electrician box
Back cover
Signal switching wires
Notes: 1.Use cross head screws to fix the wired controller bottom cover in the electric control box through the screw bar. Make
sure the wired controller bottom cover is on the same level after installation, and then install the wired controller back to the
bottom cover.
2. Over fasten the screw will lead to deformation of the back cover.
Control system
| General | Details |
|---|---|
| Name | Midea KJR-29B-BK-E Wireless Thermostat Instruction Manual |
| Make | Midea |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.33 MB |






















