Klima 825201 Intelligent Control Wi-Fi Underfloor Heating Thermostat User Manual
If you are in the process of networking, the device cannot be discovered.
You can press "+" and "-" buttons on the thermostat at the same time to
switch the wifi connection mode.
When the following interface appears, press "set" to switch between the
two modes.
6.Settings:
Wifi Connections
With this function you can change settings related with the operating of the
thermostat.The following options can be changed:
- Date and time: Thermostat will change summer and winter clock change
automatically.
- Language: English.
- Contrast: Display contrast: 0-20.
Download the app：
Compatible with IOS and Android.
If the device is connected to wifi, use this setting to disconnect the device
as well.
- Brightness: Display brightness: 0-10.
- Back light delay: Can be adjusted from 0 till 250 seconds. (0 =always on)
- LED info: When it is switched on, it indicates the current heating period..
- Temp unit:Choose Celsius or Fahrenheit.
Connection method ：
7.Advanced functions:
The thermostat provides advanced settings to suit a range of special
situations which are normally set by a technician during initial installation.
-
Heating system.
Smart wifi： WiFi icon on thermostat is blinking rapidly.
AP wifi： WiFi icon on thermostat is blinking slowly.
1. Type of heating system (floor heating or other heating)
2. Surface material: wood or other
3. Temp.to control: floor or room
These settings can also be changed using the start up wizard.
Calibration.
-
A correction can be made here on the temperature in the display and the
measured room temperature. Consult your supplier before changing
calibration setting.Setpoint range: ±5°C.
-
Intelligence.
Switch the intelligent function on or off.
The thermostat has a self thinking and adaptive system. This function
enables the thermostat to calculate when it needs to switch on so that the
required temperature is reached at the set time. (i.e. if the set time is 08:00,
the thermostat will switch on earlier so that the set temperature is reached at
08:00).
1
2
3
Scan the QR code or
download from
APP store /
Register and log in with
mobile number/email
address in the APP.
Click ‘Add Device’ or
‘+’ on the top right to
add device.
-
Difference.
Example: Set the value to 1°C.
Google Play.
The difference between switch on and off period during heating time.
The thermostat starts when the room temperature is 1°C lower than set
temperature and stops when the room temperature is 1°C higher than the set
temperature.
Attention:Please read and
agree ‘Privacy Policy and Service
agreement’ before registration.
-
Pilot wire.
Can be used to operate the thermostat through an external source.This can
be a central source or a smart home system. This function can be turned on
or off.
-
Sensor type.
Gives the possibility to adjust the sensor value. This is not required in a
standard situation.
Consult your supplier before changing sensor type.
-
Open window.
This function only works when room sensor or both sensors is selected. The
thermostat with this function will shut off automatically for 15 min when the
window opens, as it can detect that the room temp plummets.
-
Factory defaults.
All parameters are restored to default value.You need to right-click and hold
down for 5 seconds to perform this operation
4
5
6
Explanation of text / Symbols
Operate thermostat.
If the WiFi icon flashes
quickly, click
Enter Wifi password,
and click ‘Confirm’.
Click ‘WiFi thermostat
Comfort period
‘Press to connect’.
Limited floor temperature achieved (28 ºC)
Child lock activated
1
ET-5A
Electrical use for heating
Set back: standard set back temperature (pilot wire)
Set back: anti frost + 7 degree Celsius( pilot wire)
Set back mode：
The setback mode is when the thermostat ‘sets back’ to a lower temperature
during the off time periods. This is the most economical and efficient way to
achieve the best energy consumption.
7
8
Floor temperature limiter：
If the device is added
successfully, you can
change the device
You can check the
actual temperature
and set temperature
etc. on the control
interface.
Some floor coverings must be limited at a certain maximum temperature (for
example wooden floors). When the option ‘Wooden’ is selected (in the start up
wizard), the floor will not exceed 28ºC.
name and set region.
Then, click ‘Done’.
| General | Details |
|---|---|
| Name | Klima 825201 Intelligent Control Wi-Fi Underfloor Heating Thermostat User Manual |
| Make | klima |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.5 MB |
(1 votes, average: 5.00 out of 5)
Loading...
klima SF300 Thermostat User Manual
Klima 825200 Electric Underfloor Heating Thermostat User Manual
Klima C16 WiFi Floor Heating Thermostat User Guide
Klima H001 Smart Thermostat For Air Conditioner User Manual
Klima SF300 Digital Thermostat Instruction Manual
HIVE HAH2INSTAMZ-01 Active Heating Thermostat User Guide
Danfoss 014G0013 Z Wave Radiator Thermostat Installation Guide
FantiniCosmi CH143E 230V Flush Mounting Weekly Programmable Thermostat User Manual
TotalHome TTHWP Wireless Programmable Thermostat Installation Guide
GENERAL LIFE Therma 300S Wired Room Thermostat User Manual
TRANE SC360 Link System Controller and Smart Thermostat Instructions
Moes M30 x 1.5 Smart Radiator Thermostat User Manual
TR33 Large LCD Screen Smart Thermostat Instruction Manual
vaillant VR 92f/3 Wireless Additional Room Thermostat Instructions
Danfoss VICUQ25H, 088N3663 Icon Programmable 230V Room Thermostat Installation Guide