Home > Honeywell > Honeywell TH3110D1008 Non Programmable Digital Thermostat Instruction Manual

Honeywell TH3110D1008 Non Programmable Digital Thermostat Instruction Manual

24

Non-Programmable

Digital

Thermostat

PRO

3000

TH3110D1008

TH3210D1004

Series

Installation

Instructions

Wallplate installation

Remove the wallplate from the

thermostat by pulling from the

bottom, then follow directions below

for mounting.

HIPS

1. Pull wires through wire hole.

2. Position wallplate on wall, level

and mark hole positions with

pencil.

3. Drill holes at marked positions as

shown below, then tap in supplied

wall anchors.

PULL HERE

M29389A

4. Place wallplate over anchors,

insert and tighten mounting

screws.

Wire hole

Mounting

screws

Drill 3/16”

LEVEL HERE

holes for

drywall.

Drill 7/32”

holes for

plaster.

MCR29390A

Read before installing

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Honeywell TH3110D1008 Non Programmable Digital Thermostat Instruction Manual
Make	Honeywell
Language	English
Filetype	PDF (Download)
File size	0.97 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Comments are closed.

Honeywell Instructions & User Manuals

Honeywell T6 Pro Programmable Thermostat User Manual

Honeywell D1-528 Direct Thermostat Installation Guide

Honeywell FocusPRO P200 Programmable Thermostat User Guide

Honeywell RCHT8610WF Series Smart Thermostat Installation Guide

Honeywell T9 Smart Thermostat Installation Guide

Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide

Honeywell TL116A Thermostat Installation Guide

T10 Pro Smart Thermostat with Redlink Room Sensor

Honeywell TH6320WF2003 Lyric T6 Pro Wi-Fi Programmable Thermostat User Guide

Honeywell RTH9580 Wi-Fi Color Touchscreen Programmable Thermostat User Guide

Get the free PDF manual for the Honeywell TH3110D1008 Non Programmable Digital Thermostat Instruction Manual and access setup steps, usage instructions, and troubleshooting tips. 👉 View online or download now to keep your thermostat running smoothly!

Honeywell TH3110D1008 Manual: Questions and Answers

What's the difference between heating cycle rate and compressor cycle rate on the Honeywell TH3110D1008?

Heating cycle rate controls how often the furnace cycles on and off. Compressor cycle rate controls the air conditioning compressor independently.

Setting	Purpose
Heating cycle rate (Setup 5)	Furnace on/off cycles per hour
Compressor cycle rate (Setup 9)	AC compressor on/off cycles per hour

Instruction Manual, p. 5

Why won't my Honeywell TH3110D1008 heating or cooling system respond?

Check multiple conditions.

Set system switch to Heat and make sure temperature is set higher than inside temperature
Set system switch to Cool and make sure temperature is set lower than inside temperature
Wait 5 minutes for the system to respond Instruction Manual, p. 7