Klima C16 WiFi Floor Heating Thermostat User Guide

1

2

3

4

C16 Guide For programming the Controller  

The C16 will follow the Schedule below as this is the default parameters.  

SECTION 1  

-WAKE (PERIOD 1 START TIME): when it will switch on in the morning and what  

temperature it will heat up to  

-LEAVE (PERIOD 1 END TIME): When it will turn off and what temperature it  

maintains at, (We recommend for it to stay a temperature that is 5 degrees lower  

than the temperature set for when it is heating)  

-BACK (PERIOD 2 START TIME): When it will turn back on for the afternoon  

-SLEEP (PERIOD 2 END TIME): When it will turn off (We recommend for it to stay a  

temperature that is 5 degrees lower than the temperature set for when it is heating)  

If you want to set it so you can set Each day individually then please follow Steps A1  

If you want to set it so you can program Monday – Friday as one time and then  

Saturday and Sunday as different day, please follow Steps B1.  

A STEPS  

A1) Press and Hold the square Button for three seconds (this should appear)  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Klima C16 WiFi Floor Heating Thermostat User Guide
Make	klima
Language	English
Filetype	PDF (Download)
File size	0.13 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• klima

Klima C16 WiFi Floor Heating Thermostat User Guide Overview

Summary of Contents

• Page 1: C16 guide for programming the controller. The C16 will follow the schedule below as this is the default parameters. Wake (period 1 start time): when it will switch on in the morning and what temperature it will heat up to. Leave (period 1 end time): when it will turn off and what temperature it maintains at. Back (period 2 start time): when it will turn back on for the afternoon. Sleep (period 2 end time): when it will turn off. We recommend for it to stay a temperature that is 5 degrees lower than the temperature set for when it is heating. If you want to set it so you can set each day individually then please follow steps A1. If you want to set it so you can program Monday – Friday as one time and then Saturday and Sunday as different day, please follow steps B1. Press and hold the square button for three seconds.
• Page 2: Press the Up arrow until in the top right it says ‘SER’. Press the Square Button ONCE. Press the square Button until it says “5” in the top left. Make sure in the top right it says “00” then press the square button until you’re at the home screen. Follow steps A1 – A4. Press the up button ONCE, in the top right it will say ’01’.
• Page 3: Press the square button until you’re at the home screen. Steps for programming of controller unit. Before starting this programming section, please review the top section. When programming the schedule, follow the pattern displayed in section 1. Press and hold the square button for three seconds. Press the up arrow until it says “EVE” in the top right. Press the square button once. Press the up arrow to select the day of the week you want to program. When on the day you want to program, press the square button once.
• Page 4: The first screen will show a house type symbol in the bottom left-hand corner. Choose the relevant period you want to change by pressing the up or down arrow. Press the square button once. Select the desired hour and press the square button once. Select the correct minutes and press the square button once. Select the temperature you want to heat it up to. Repeat the steps for the rest of the different periods. When you have completed setting the times, press the up arrow until END is highlighted and flashing. This will now implement and follow the programmed times.