Honeywell CM721 Programmable Room Thermostat User Guide
SETTING-UP THE CM721
‘Getting Started’
This section shows you how to setup and run the thermostat in 3 simple steps:
STEP 1: Installing the Batteries
Note: Please follow the instructions in this section only if the thermostat screen is blank (no
symbols or digits are displayed). If the room temperature is already displayed move on to Step 2:
Setting the Date and Time.
To install the Batteries:
a. Lift up the front cover of the thermostat to reveal the battery cover and product controls.
b. Remove the battery cover by pressing down and sliding out.
c. Insert the 2 x AA LR6 Alkaline Batteries supplied with the thermostat, ensuring the correct
orientation (see ‘Controls Layout’ on page 2).
d. After a short pause the thermostat will display information on the screen and is now ready for use.
e. Replace the battery cover by sliding it firmly back into the front of the thermostat.
STEP 2: Setting the Date and Time
To set the Date and Time:
a. Press the DATE button to begin setting the date. When you set
the date for the first time after the batteries are inserted, the
display will show:
Press the
or buttons to set the current day of the month
(e.g. d 01 = 1st day of the month) then press the green
button to confirm.
b. Press the
year (e.g. m 01 = January) then press the green
or
buttons to set the current month of the
button to
confirm.
c. Press the
or
= 2006) then press the green
buttons to set the current year (e.g. yr 06
button to confirm.
The date is now stored.
d. Use the
the green
or buttons to set the correct time then press
button to confirm. Each press of the buttons will
change the time by one minute and holding them down will
change the time slowly at first and get progressively quicker.
AM
Note: If this mode is entered accidentally then press the
AUTO, MAN or OFF buttons to exit.
STEP 3: Running the Built-in Heating Program
The thermostat is now ready for operation. Press the AUTO button and the built-in heating program
will start running. Note: The built-in heating program has been designed to provide normal comfort
requirements, but if you want to customise the settings please see the next section ‘Programming
the CM721’.
3
firealarmresources.com
| General | Details |
|---|---|
| Name | Honeywell CM721 Programmable Room Thermostat User Guide |
| Make | Honeywell |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.26 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Honeywell T6 Pro Programmable Thermostat User Manual
Honeywell D1-528 Direct Thermostat Installation Guide
Honeywell FocusPRO P200 Programmable Thermostat User Guide
Honeywell RCHT8610WF Series Smart Thermostat Installation Guide
Honeywell T9 Smart Thermostat Installation Guide
Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide
Honeywell TL116A Thermostat Installation Guide
T10 Pro Smart Thermostat with Redlink Room Sensor
Honeywell TH6320WF2003 Lyric T6 Pro Wi-Fi Programmable Thermostat User Guide
Honeywell RLV3100 Digital Thermostat Installation Guide
tuya M3 Series Thermostat User Guide
Danfoss CF Wireless Floorheating Controller and Room Thermostat Instruction Manual
Danfoss 220V Electronic Intelligent Timer Thermostat Installation Guide
sygonix 2522212 Installable Thermostat Instruction Manual
ENGO CONTROLS E55-B, E55-W Wi-Fi Thermostat User Guide
MYSON Unisenza Plus Thermostat Instruction Manual
Klima H001 Smart Thermostat For Air Conditioner User Manual
Danfoss CET B-RF ATC Cylinder Thermostat Installation Guide
eurotherm Smart One 365 Thermostat User Manual
uheat TW02 Touch Screen Room Thermostat User Guide