Honeywell CM721 Programmable Room Thermostat User Guide
‘Efficient Daily Use’
PROGRAMMING THE CM721
The Built-in Heating Program
The built-in heating program has 4 temperature level changes that can be set between 3.00am
and 2.50am the following day - allowing you to maintain the evening temperature after midnight.
Each temperature level can be set between 5°C and 35°C, and adjusted in 0.5°C increments. The
factory default program for heating is as follows.
Period
1
2
3
4
Time
6:30
21°C
8:00
18°C
18:00
21°C
22:30
16°C
Temperature
Reviewing the Heating Program
To review or edit the heating program use the PROGRAM
the 4 individual programming periods.
or
buttons to navigate between
Modifying the Heating Program
To change the heating program:
a. Press either of the PROGRAM
enter the programming mode. The time / temperature
settings for period will be flashing as shown. The
active period is highlighted by flashing square
around the numbers at the bottom of the screen.
or
buttons to
1
a
1
2
3
4
b. To adjust the period start time use the or buttons, the display will stop flashing and the
‘OK?’ indicator will be displayed. Holding the button down will change the time quickly.
Note: If you are pressing the or buttons and the display flashes the next period, it
means the next period will be pushed forward.
c. Once the required time is reached press the green
button to confirm.
Note:If the original time setting did not require adjustment press the green
to step ‘d’.
button to move
or
d. The temperature setting for period
buttons and confirm the setting again by pressing the green
1
will now be flashing. To adjust this press the
button.
e. The next time and temperature period will now be active. Adjust this by repeating steps b - d
above until all 4 periods are set or press the AUTO button to run the program as set, at any time.
Disabling / Enabling Time Periods
The thermostat has 4 periods that can be programmed, but you may not need all of these switch
points for your heating requirements. Therefore, any period from 2 to 4 can be removed from (or
returned to) the heating program profile.
To disable or enable time periods:
a. To disable unwanted periods go to the desired period ( 2 to 4 ) using the PROGRAM
or
buttons to navigate, ensure the correct period is highlighted with the flashing square symbol.
Press and hold the button for at least 2 seconds and the display will indicate the period has
been removed from the program.
b. To enable periods again follow the same procedure as above, navigating to the already disabled
period. To enable this period again press and hold the button for at least 2 seconds.
4
firealarmresources.com
| General | Details |
|---|---|
| Name | Honeywell CM721 Programmable Room Thermostat User Guide |
| Make | Honeywell |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.26 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Honeywell T6 Pro Programmable Thermostat User Manual
Honeywell D1-528 Direct Thermostat Installation Guide
Honeywell FocusPRO P200 Programmable Thermostat User Guide
Honeywell RCHT8610WF Series Smart Thermostat Installation Guide
Honeywell T9 Smart Thermostat Installation Guide
Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide
Honeywell TL116A Thermostat Installation Guide
T10 Pro Smart Thermostat with Redlink Room Sensor
Honeywell TH6320WF2003 Lyric T6 Pro Wi-Fi Programmable Thermostat User Guide
Honeywell RTH2510/RTH2410 Thermostat Installation Guide
Honeywell CMR707A1049 Programmable Room Thermostat User Guide
BEOK TGR85-EP Underfloor Heating Thermostat User Guide
Schneider Electric TC900 Series Space Logic Thermostat Instruction Manual
White Rodgers 1F85-0422 Blue Universal Thermostat Instruction Manual
Honeywell PRO 1000 Series Heat Pump Thermostat Instruction Manual
EBERLE UTE 1032-55, UTE 1032-50 Flush Mounted Room Thermostat Owner’s Manual
COPELAND ST55 Sensi Smart Thermostat Instruction Manual
iO HVAC Controls T-32-P2 Universal Thermostat Instruction Manual
WARMZONE LED WiFi Floor Heating Thermostat Owner’s Manual
JBM 54342 Parts Cleaner Machine with Thermostat Instruction Manual