Honeywell CM721 Programmable Room Thermostat User Guide
‘Efficient Daily Use’
PROGRAMMING THE CM727
The Built-in Heating Program
The built-in heating program has 4 temperature level changes per day that can be set between
3.00am and 2.50am the following day - allowing you to maintain the evening temperature after
midnight. Each temperature level can be set between 5°C and 35°C, and adjusted in 0.5°C
increments. The factory default program for heating is as follows.
Monday to Friday
(Day 1 to 5)
Period
1
2
3
4
Time
6:30
21°C
8:00
18°C
18:00
21°C
22:30
16°C
Temperature
Saturday & Sunday
(Day 6 & 7)
Period
1
2
3
4
Time
8:00
21°C
10:00
21°C
18:00
21°C
23:00
16°C
Temperature
Reviewing the Heating Program
To review or edit the heating program use the PROGRAM
or
buttons to navigate between the
4 individual programming periods for that day. Use the DATE/DAY button to step through each day of
the week, so the complete 7 day heating program can be reviewed or edited.
Modifying the Heating Program
To change the heating program:
1
2
3
4
5
6
7
a. Press either of the PROGRAM
enter the programming mode. The time / temperature
settings for period on Monday (Day 1) will be
or
buttons to
1
flashing as shown. The active period is highlighted by
a flashing square around the numbers at the bottom of
the screen and the selected day is shown with the day
indicator.
1
2
3
4
b. To adjust the period start time use the
or
buttons, the ‘OK?’ indicator will be displayed to
confirm the change. Holding the button down will change the time quickly.
Note: If you are pressing the or buttons and the display flashes the next period, it
means the next period will be pushed forward.
c. Once the required time is reached press the green
button to confirm.
Note:If the original time setting did not require adjustment press the green
to step ‘d’.
button to move
d. The temperature setting for period
press the or buttons and confirm the setting again by pressing the green
1
on Monday (Day 1) will now be flashing. To adjust this
button.
e. The next time and temperature period will now be active. Adjust this by repeating steps b - d
above until all 4 periods are set for Monday or press the AUTO button to run the program as
set, at any time.
You now have a choice of how to set the program for the next day:
10
firealarmresources.com
| General | Details |
|---|---|
| Name | Honeywell CM721 Programmable Room Thermostat User Guide |
| Make | Honeywell |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.26 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Honeywell T6 Pro Programmable Thermostat User Manual
Honeywell D1-528 Direct Thermostat Installation Guide
Honeywell FocusPRO P200 Programmable Thermostat User Guide
Honeywell RCHT8610WF Series Smart Thermostat Installation Guide
Honeywell T9 Smart Thermostat Installation Guide
Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide
Honeywell TL116A Thermostat Installation Guide
T10 Pro Smart Thermostat with Redlink Room Sensor
Honeywell TH6320WF2003 Lyric T6 Pro Wi-Fi Programmable Thermostat User Guide
Honeywell RTH9580 Wi-Fi Color Touchscreen Programmable Thermostat User Guide
SIEMENS 194-2042 Pnuematic Room Thermostat User Guide
sinope Smart Low Voltage Thermostat TH1400WF Installation Guide
GENERAL LIFE ARUNA HT300S Smart Room Thermostat User Manual
HYSEN HY518WE WIFI Digital Heating Thermostat User Manual
BOSCH Radiator Thermostat Instructions
ecoer EST02 Smart Wi-Fi Thermostat User Guide
Schneider Electric TC900 Series Space Logic Thermostat Instruction Manual
LUX TX1500E Programmable Thermostat Instruction Manual
MI-HEAT MST1 Room Thermostat for Underfloor Heating User Manual
Sygonix 2735095 Wireless Indoor Thermostat Instruction Manual