GENERAL LIFE MITRA 260S Wired Room Thermostat User Manual

1

2

ROOM THERMOSTAT PLACEMENT  

ROOM THERMOSTAT WIRING DIAGRAM  

ENGLISH  

Room Thermostat needs to be placed in the room which is used most  

frequently. For instance; living room or lounge. Placing the Room  

Thermostat in a spot that have air circulation like entrance of a room  

or side of window should be avoided. Also anywhere close to  

heating/cooling units such as radiator, stove and spots which get  

direct sun lights would not be suitable. Room Thermostat needs to be  

located above the floor 150 cm height. Few trials may be made to find  

the most convenientspot.  

HEATING/COOLING UNIT  

DIGITAL ROOM THERMOSTAT  

generallife.com.tr  

MITRA 260S USER MANUAL  

GENERAL SPECIFICATIONS  

NO COM  

min. 20 cm  

DIGITAL ROOM THERMOSTAT  

MITRA 260S is a wired room thermostat. The user can adjust the  

room temperature with the required temperature and get more  

comfortable and economic heating/cooling.  

Warning!  

Operations within the heating  

/

cooling unit or the electrical  

installation must be carriedout byprofessionally qualified persons.  

 PreciseTemperatureMeasurement  

 Heating calibration  

ON/OFFControl  

Wired Connection  

TPIAlgorithm  

ROOM THERMOSTATTEMPERATURE CALIBRATION  

Temperature sensors which are used in Room Thermostats are highly  

sensitive. You may need to calibrate your Room Thermostat if you  

would like to get the same temperature values with other  

thermometersin yourliving space.  

 Heating/Cooling Modes  

MITRA 260S  

USER MANUAL  

MITRA 260S AND EQUIPMENTS  

MITRA 260S  

Room Thermostat  

Alkaline  

Battery  

Dowels and  

Screws  

 While your device is turned off, press and hold the button for 3  

seconds.  

 Press the button until the “  

” menu appers. In order to see the  

desired temperature, set the temperature difference by turning the  

button to right or left. This valuecan be arranged between “-8^oC" and  

“+8^oC".  

BATTERY PLACEMENT  

Before starting, power off the device connected to the Room  

Thermostatand makesurethattheenergy is cutoff.  

 To save the settings and exit, press the "On/Off" button until the  

deviceturns off.  

Note:Recommended tempreturecalibration is “0.0^oC”.  

TECHNICAL DATA  

Dimensions  

85mm / 125mm / 24mm  

3V DC (2 x AAA alkaline battery)  

2A/30VDC (Resistive load)  

0.5A/125VAC (Resistive load)  

0.1^oC  

Operating Current  

Relay NO Switching Current  

ROOM THERMOSTAT HEATING / COOLING MODES  

Your Room Thermostat has heating and cooling modes. In order to  

switcheasilybetweenheating and cooling modes:  

 While your device is turned off, press and hold the button for 3  

seconds.  

Temperature Measurement  

Accuracy  

Operating Temperature Range  

Battery Life  

(5^oC) – (30^oC)  

1 Year (2 x AAA)  

(-10^oC) – (+50^oC)  

(-20^oC) – (+60^oC)  

 Pressthe button until the “  

” menu appears.  

” (heating) and “  

Operating Temperature  

Storage Temperature  

 You can switch between “  

” (cooling) modes  

” menu.  

byturning the button to right or leftin the “  

 To save the settings and exit, press the button until the device turns  

off.  

ROOM THERMOSTAT  

 The settings you have made have been saved. Once you turned on  

yourdevice, itwilloperatewiththe changed settings.  

1

As shown in the picture above, press the screwdriver forward from the  

space shown, bend the tabs and separate the front cover. Insert 2 new  

AAA alkaline batteries in the battery housing with the correct battery  

direction. Replace both batteries at the same time. Then align the  

front part of your Room Thermostat to the back and squeeze it  

towards theback.  

FACTORY SETTINGS RESET  

2

You can reset your Room Thermostat to its default factory settings.  

This operation resets the calibration setting and heating/coling  

modes to factory setting. To reset your Room Thermostat to factory  

setting:  

3

4

5

6

Low Battery Warning: When the “ ” icon appears on the screen, it  

means “low battery warning”. It is recommended to replace the  

batterieswhen this warning appears.  

 While your device is turned off, press and hold the button for 3  

seconds.  

1

2

3

Battery Indicator  

Room Temperature  

Set Temperature  

Cooling Indicator  

 Pressthebutton until the“  

 While in the “ “ menu, turn the button to right or left in order to  

select“ “ option and pressthebutton.  

” menu appears.  

Warning: When the product is not used for a long period (more than 15  

days), remove the batteries. Otherwise, malfunctions that may occur  

would beoutof warranty.  

 Your devicewillbe turned off and resetto factory settings.  

Pleasethrowyour dead batteries into thewastebin forbatteries.  

- If the Cooling Indicator is blinking, the cooling unit is  

4

working.  

- If the Cooling Indicator is steady, the cooling unit is not  

working.  

Heating Indicator  

- If the Heating Indicator is blinking, the heating unit is  

working.  

5

6

- If the Heating Indicator is steady, the heating unit is not  

working.  

ON/OFF and Temperature Setting Button  

generallife.com.tr  

2

1

3

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	GENERAL LIFE MITRA 260S Wired Room Thermostat User Manual
Make	GENERAL LIFE
Language	English
Filetype	PDF (Download)
File size	2.04 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• GENERAL LIFE

GENERAL LIFE MITRA 260S Wired Room Thermostat User Manual Overview

Summary of Contents

• Page 1: Room thermostat needs to be placed in the room which is used most frequently. Placing the room thermostat in a spot with air circulation or close to heating/cooling units should be avoided. Room thermostat needs to be located above the floor at a height of 150 cm. MITRA 260S is a wired room thermostat that allows users to adjust room temperature for comfortable and economic heating/cooling. Operations within the heating/cooling unit or electrical installation must be carried out by professionally qualified persons. Temperature sensors in room thermostats are highly sensitive and may require calibration for accurate readings. Your room thermostat has heating and cooling modes that can be switched easily. You can reset your room thermostat to its default factory settings, which will reset calibration and heating/cooling modes. When the low battery warning icon appears, it is recommended to replace the batteries. If the cooling or heating indicator is blinking, it indicates that the respective unit is working.
• Page 2: warranty conditions The warranty period starts from the invoice date and is warranted against manufacturing defects for 5 years. tpi room thermostat working logic If the placement of the TPI Room Thermostats is changed, the learning process will restart and should be considered as 7 days. Your Room Thermostat works with the TPI algorithm, predicting temperature changes to maintain the set temperature with minimal deviations. Devices and apparatus are delivered to the customer in working condition, with on-site commissioning subject to a service fee. The maintenance of devices and apparatus is done in our company, and round travel fares belong to the customer. TPI technology is designed to ensure energy efficiency from your heating/cooling system. If your heating/cooling unit has on-off connections, your Room Thermostat is compatible. Malfunctions resulting from improper use are not covered by the warranty. The repair period of the product cannot exceed 20 working days, starting from the notification of the malfunction. The warranty document must be kept by the customer during the warranty period; if lost, repairs will incur a fee.