FC610 Bandary Smart Thermostat Owner’s Manual
Stand:
Seite 18 / 23
90
Stand:
Seite 7 / 23
303
0x012F
Read-write Electrical Heater Stage 3 Threshold control variable
0..100%
1.0
%
Display panel
304
0x0130
Read-write
Valve type selection
5DO:
27.Fanstagesymbol
0= ON-OFF (ON = Valve Open, OFF = Valve Closed)
1=PWM (0%= 0%PWM .. 100% = 100% PWM)
2= OFF-ON (OFF = Valve Open, ON = Valve Closed)
3= inverted PWM (0%= 100%PWM .100% = 0% PWM)
AO2DO3R, AO3DO2R:
26.Thermostat address ID
25.ECOmode
24.Time delay
1.Modbus active
23.Wifisymbol
2.Coolingmode
22.Celsius
3.Ventilation mode
4.Heatingmode
21.Electricheating
4= proportional (0V = 0% ..10V = 100%)
5=invers proportional (0V = 100% ..10V = 0%)
6: proportional Belimo 6 way
20.Fahrenheit
19.Lock
18.ESI
5.Automode
5DO:0
6.Temperature display
17.Scheduler
AO2DO3R:4
AO3DO2R:4
7.Valve value
16.Frost Protection
15.Week
7: proportional Sauter 6 way with Ø15mm
8: proportional Sauter 6 way with Ø20mm
9: proportional Belimo 6 way, counter direction
10: proportional Sauter 6 way with Ø15mm,
counter direction
8.Function symbol
9.Time setting
14.Heatingvalve
13.Coolingvalve
12.Fault alarm
11.Humidity
10.TVOC
1 Modbus active – When the device is connected to BMS via to RS485 interface ,the Modbus symbol will active.
2 Cooling mode – when the set temperature is lower than room temperature ,the device will work in cooling mode.
3 Ventilation mode - Fan is working, water valve keeps off.
11: proportional Sauter 6 way with Ø20mm,
counter direction
4 Heating mode – when the set temperature is higher than room temperature ,the device will work in heating mode .
DO5R,AO2DO3R, AO3DO2R:
5 Auto mode –The thermostat switches automatically between cooling and heating according to the temperature difference between
set temperature and room temperature. A time delay of approx..1min between cooling /heating mode changes is implemented to
12: no valve
ensure safe and eco-friendly operation .Auto mode will be active in below types:
6 Temperature display – Normally ,the device displays room temperature .when the user change temperature ,it displays set
305
0x0131
Read-write reserved
0
temperature ,after 4 seconds ,display room temperature. (Factory default : ℃ display ),you can switch to Fahrenheit (°F) by APP or
Modbus.
Inputs
7 Valve value – valve value%
Address
0x0150
Access Description
Resolution / Unit
Default
8 Function symbol – Temperature setting, Mode adjustment or Parameter setting status
9 Time setting –Real time of Day
336
Read-write Configuration external input 1
0 = No function
10 TVOC – Room air quality
1 = Occupancy sensor (Open = Occupied)
2 = Occupancy sensor (Closed =Occupied)
3 = Window contact (Open = Window Open)
4 = Window contact (Closed = Window Open)
5 = Disable heating (Open = Heating disabled)
6 = Disable heating (Closed = Heating Disabled)
7 = Disable cooling (Open = Disable Cooling)
8 = Disable cooling (Closed = Disable Cooling)
11 Humidity – Relative room humidity
12 Fault alarm – ERROR alarm symbol and display ERROR code
13 Cooling valve – Cooling mode is active .
14 Heating valve – heating mode is active
15 week-week display
0
| General | Details |
|---|---|
| Name | FC610 Bandary Smart Thermostat Owner’s Manual |
| Make | bandary |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.24 MB |
(1 votes, average: 5.00 out of 5)
Loading...
bandary FC660 Smart Thermostat User Guide
LUTRON 653 Right Thermostat Control Datasheet
Honeywell Home RCHT8610WF T5 Smart Thermostat Installation Guide
TCL IPOWER Heat Mat Thermostat Instruction Manual
Honeywell CMR707A1049 Programmable Room Thermostat User Guide
BAXI uSense 2 Wired Smart Thermostat Installation Guide
STELPRO STE241 Low Voltage Electronic Thermostat User Guide
WILLIAMS P322016 Thermostat Instruction Manual
MOES BRT-100 Radiator TRV Thermostat Instruction Manual
Danfoss Icon2 24V RT Room Thermostat Installation Guide
nVent RAYCHEM ETS-05 Electronic Thermostat Instruction Manual