ENSTO ECO10BTW-J Heat Control Thermostat Instruction Manual
•
•
The change may be either a rise or a drop in temperature.
The blue LED indicator C is on when the temperature change is connected.
5.6. You can carry out temperature changes in different ways depending on what kind of
a change is needed.
•
”Calendar” is intended for weekly reoccuring events. For example, on weekdays you
can drop the temperature overnight and while you are away. Note! When making
settings for overnight, the night must be in two sections.
•
•
”Boost” is intended for a temporary temperature change. For example, after a shower
you can raise the temperature in the bathroom, so that the floor will dry faster.
“Vacation” is intended for long-term changes in temperature, e.g for a weekend
break or an annual holiday.
5.7. The “Calendar”, “Boost” and “Vacation” buttons are on / off buttons. When the tem-
perature change is activated, the “Calendar” and “Vacation” buttons are green, the “Boost”
button is orange.
5.8. Press the
button on home display to enter the editing mode, figure 10.
5.9. When the function ”Adaptive temperature change” is active, the thermostat will
advance the heating, so that the desired temperature has been reached at the scheduled
time. By default, the function is on.
External Temperature Control
5.10. You can use external temperature control, if external voltage has been connected to
the thermostat.
•
•
Disable / Enable the function from “Settings / External control”.
From “Temperature” you can set the desired temperature value. The default temper-
ature setting for external control is 10 °C.
•
•
•
“Temperature change” can be either a rise or a drop in the set point temperature.
The blue LED indicator (C) is on when the external control is in use.
If the “External Control / Temperature” is enabled you cannot use the adjustment
knob for setting temperature.
Home Screen, figure 10
Active device
G
H
K
L
Set point temperature
Actual temperature
On / Off button
Enter editing mode
N
Resetting the Factory Settings
5.12. Reset the factory settings, figure 11.
•
•
•
Remove the adjustment knob E.
Press the Bluetooth button D on the thermostat.
After 7 seconds, the blue LED indicator C starts to blink quickly.
RAK125 / 2024-06-06
21 / 36
| General | Details |
|---|---|
| Name | ENSTO ECO10BTW-J Heat Control Thermostat Instruction Manual |
| Make | ENSTO |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.7 MB |
(1 votes, average: 5.00 out of 5)
Loading...
ENSTO ECO10BTW-J Floor Heating Thermostat Instruction Manual
ENSTO ECO16BTD Floor Heating Thermostat User Guide
ENSTO ECO16BT-J Floor Heating Thermostat User Guide
ENSTO ECO16BT-E Floor Heating Thermostat User Guide
ENSTO ECO500 Frost Protection Thermostat Instruction Manual
Ensto ECO16BT-IN-WW Floor Heating Thermostat User Guide
ENSTO ECO16TOUCH Combination Thermostat Instruction Manual
ENSTO ECO16BTD Combination Thermostat Instruction Manual
ENSTO ECO16BT-EX Floor Heating Thermostat User Guide
Honeywell Home T2 Programmable Thermostat Installation Guide
namron 4512737 Touch Zigbee 16A Thermostat Instruction Manual
HACH LT200 Dry Thermostat User Manual
CONTEMPORARY CONTROLS BAST-421C-B2 BACnet Communicating Thermostat User Manual
SALUS RT310TX Wireless Programmable Thermostat User Guide
Danfoss TP7000 Range Electronic 7 Day Programmable Room Thermostat Installation Guide
Wagner AL8010F Refrigeration or Heating Digital Thermostat User Manual
AXOR 17716090 CARLTON Highflow Thermostat Instruction Manual
GENERAL LIFE HT25S RF Wireless Room Thermostat User Manual
KINGHOME WK-010WC1 Smart Thermostat Owner’s Manual