ENGO CONTROLS ESIMPLE230B 230V Simple Dial Thermostat User Guide

1

2

SIMPLE  

INTRODUCTION:  

Proper thermostat location  

ESIMPLE230W / ESIMPLE230B is a surface-mounted, wired room thermostat  

intended for surface heating / cooling, characterized by high thermal inertia. The  

room setpoint temperature is set with a knob. Thanks to the built-in algorithms,  

it offers much better temperature control accuracy than traditional mechanical  

thermostats.  

Simple Dial Thermostat 230V  

Product Compliance  

This product complies with the following EU Directives: 2014/30/EU, 2014/35/EU,  

2011/65/EU.  

Please note!  

For the thermostat to work properly, it must be installed in a suitable place.  

Preferably approx. 150 cm above floor level, away from sources of heat or cold. In  

addition, the thermostat should not be installed behind curtains or other  

obstacles or in places with high humidity, as this will prevent an accurate  

measurement of the temperature in the room. It is not recommended to install  

the thermostat on an outside wall, in a draft or in a place where it will be exposed  

to direct sunlight.  

ESIMPLE230W  

ESIMPLE230B  

SAFETY INFORMATION:  

Use in accordance with national and EU regulations. Use the device only as  

intended, keeping it in a dry condition. The product is for indoor use only. Please  

read the entire manual, before installation or use.  

QUICK GUIDE  

INSTALLATION:  

Ver. 1  

Release date: VIII 2022  

Installation must be performed by a qualified person with appropriate  

electrical qualifications, in accordance with the standards and regulations in  

force in a given country and in the EU. The manufacturer is not responsible for  

non-compliance with the instructions  

Diagram for connecting the thermostat to the underfloor heating  

control box.  

WARNING:  

THERMOSTAT  

ESIMPLE230W/  

ESIMPLE230B  

For the entire installation, there may be additional protection requirements,  

which the installer is responsible for.  

N L SL  

Package content  

Producer:  

Distributor:  

Engo Controls S.C.  

43-200 Pszczyna  

Górnośląska 3E  

Poland  

QL CONTROLS Sp z o.o. Sp. k.  

43-262 Kobielice  

Rolna 4  

N

L

INPUT_1  

SL1  

N

L

INPUT_2  

SL2  

Control box  

ECB08M230  

Poland  

THERMOSTAT  

THERMOSTAT  

LED  

LED  

Legend:  

Thermostat ESIMPLE230W / ESIMPLE230B  

ENGO SIMPLE DIAL THERMOSTAT  

L, N - power supply 230V  

ESIMPLE230W  

ESIMPLE230B  

SL - 230V output signal from thermostat  

Producent:  

www.engocontrols.com  

Engo Controls S.C.  

43-200 Pszczyna  

ul. Górnośląska 3E  

Polska  

Skrócona instrukcja  

Dystrybutor:  

QL CONTROLS Sp o.o. Sp. k.  

43-262 Kobielice  

Ver. 1  

Data wydania:  

z

V

2022  

ul. Rolna  

Polska  

4

www.engocontrols.com  

SL1...SL8 - 230V control input in the control box  

Mounting screws  

Manual  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	ENGO CONTROLS ESIMPLE230B 230V Simple Dial Thermostat User Guide
Make	ENGO CONTROLS
Language	English
Filetype	PDF (Download)
File size	0.14 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• ENGO CONTROLS

ENGO CONTROLS ESIMPLE230B 230V Simple Dial Thermostat User Guide Overview

Summary of Contents

• Page 1: Introduction: Proper thermostat location is crucial for accurate temperature control. The ESIMPLE230W / ESIMPLE230B is a surface-mounted, wired room thermostat designed for surface heating and cooling. It features high thermal inertia and offers better temperature control accuracy than traditional mechanical thermostats. This product complies with EU Directives 2014/30/EU, 2014/35/EU, and 2011/65/EU. For optimal performance, install the thermostat approximately 150 cm above floor level, away from heat or cold sources. Avoid placing the thermostat behind curtains, in high humidity areas, or on outside walls. Use the device in accordance with national and EU regulations and only for indoor purposes. Installation must be performed by a qualified person following local standards and regulations. The manufacturer is not responsible for non-compliance with installation instructions. There may be additional protection requirements for the installation that the installer must address.
• Page 2: Wall mounting LED light indications The status of the thermostat is determined by the LED, illuminating in the following colors. During wire connections procedure, please make sure they are not connected to the 230V AC power supply. Additional functions of the ESIMPLE230W / ESIMPLE230B thermostats can be switched on or off by switches located on the front cover. The heating or cooling mode is based on the setting of the switches (sliders) located under the knob on the front cover. The position of the HEAT slider indicates the heating mode. The position of the COOL slider indicates the cooling mode. Temperature control range is 5 – 30°C. The thermostat gives a possibility to choose the mode of controlling the room temperature by TPI algorithm or by hysteresis +/-0.5°C. IP protection class is IP30.