DAIKIN DKN509 Wireless Communicating Thermostat Instruction Manual

1

2

3

4

5

6

INSTALLATION GUIDE  

DKN509 Wireless Communicating  

Thermostat  

INTRODUCTION  

The DKN509 Wireless Communicating Thermostat is integral to the SiteLine™ for Wireless  

BAS (building automation system). Combined with the Central Controller and wireless  

communicating sensors, they provide building managers and occupants easy, wall-  

mounted comfort control. Built into the Wireless Thermostat are sensors for monitoring  

indoor air quality (IAQ), light, sound, and occupancy.  

PACKAGE CONTENTS  

•

•

DKN509 Wireless Communicating Thermostat  

Mounting accessories  

SPECIFICATIONS  

Power  

Power Source: 24V AC/DC input (+/- 15%)  

Peak consumption (wireless communicating thermostat): 1.4VA  

Maximum  

Peak consumption, 1W nominal (1.3W maximum) power  

consumption  

Operating range  

Communication  

Temperature 0 to 122°F (-17 to 50°C)  

Humidity 20-85% non-condensing.  

900-928 MHz Mesh IEEE 802.15.4-compliant, for communications  

to CCU  

Bluetooth: BLE 4.1 for commissioning, triangulation and  

communication to wireless sensors  

3-wire sensor bus for daisy-chained sensor communication and  

low power 3V dc  

4-wire interface for RS 485 communication @ 115200 baud and  

5V DC, 100mA power source  

Inputs  

2 x 10K Type-2 thermistor inputs with 2% accuracy  

2 x 0-10V Analog voltage inputs with 2% detection accuracy (2-  

10V)  

Touch slider for temperature control along with 3 mechanical  

buttons  

IM 1339-1 • DKN509 Wireless Thermostat  

www.DaikinApplied.com  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	DAIKIN DKN509 Wireless Communicating Thermostat Instruction Manual
Make	Daikin
Language	English
Filetype	PDF (Download)
File size	0.18 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• Daikin

DAIKIN DKN509 Wireless Communicating Thermostat Instruction Manual Overview

Summary of Contents

• Page 1: INSTALLATION GUIDE DKN509 Wireless Communicating Thermostat INTRODUCTION The DKN509 Wireless Communicating Thermostat is integral to the SiteLine™ for Wireless BAS. It provides building managers and occupants easy, wall-mounted comfort control. Built into the Wireless Thermostat are sensors for monitoring indoor air quality, light, sound, and occupancy. PACKAGE CONTENTS DKN509 Wireless Communicating Thermostat Mounting accessories SPECIFICATIONS Power Source: 24V AC/DC input (+/- 15%) Peak consumption: 1.4VA Operating range: Temperature 0 to 122°F (-17 to 50°C), Humidity 20-85% non-condensing. Communication: 900-928 MHz Mesh IEEE 802.15.4-compliant, Bluetooth: BLE 4.1 for commissioning. Inputs: 2 x 10K Type-2 thermistor inputs with 2% accuracy, 2 x 0-10V Analog voltage inputs with 2% detection accuracy. Touch slider for temperature control along with 3 mechanical buttons.
• Page 2: Outputs include relays rated for 24V DC/1A and analog outputs. The device features a 2.8 240x320 pixel TFT display. It has a CO2 sensor with a range of 0 - 40,000 ppm and an accuracy of +/-30ppm. The VOC sensor has a typical accuracy of 15% of the measured value. Occupancy sensor detection range is 4m with a 15-degree angle. The light sensor includes a high-accuracy UV index sensor. Temperature sensor accuracy is typically +/- 0.2°C. Humidity sensor accuracy is typically +/- 2% RH. Warnings include the importance of correct wiring polarity to avoid damage. Installation must comply with all state and local codes.
• Page 3: Mounting Controller connection plate Wireless communicating thermostat Allen head screws Rubber cover 1 Rubber cover 2 Gang box Back plate PHP screws
• Page 4: Place the controller connection plate and the back plate on the gang box. Align the wireless communicating thermostat interface to lock onto the controller connection plate. Use the Allen head screws to make the setup tamper-proof. Rubber covers must be fixed to cover the programming pins. Installations carried out by non-certified technicians would void warranty. Refer to documentation provided with the job for more information on wiring and usage. Use the Daikin Wireless Help Center for application specific wiring schematics and user guides. Visit the support website for instructional videos and installation guides. Technical support is available through the provided contact information. IM 1339-1 • DKN509 Wireless Thermostat.
• Page 5: This device complies with part 15 of the FCC Rules. Operation is subject to two conditions: this device may not cause harmful interference, and this device must accept any interference received. The grantee is not responsible for any changes or modifications not expressly approved. This equipment has been tested and found to comply with the limits for a Class B digital device. This equipment generates, uses, and can radiate radio frequency energy, and may cause harmful interference if not installed and used according to the instructions. If this equipment does cause harmful interference, the user is encouraged to try to correct the interference by reorienting the receiving antenna or increasing the separation between the equipment and receiver. This equipment complies with the FCC radiation exposure limits set forth for an uncontrolled environment and should be installed with a minimum distance of 20cm between the radiator and all persons. This device contains license-exempt transmitter(s)/receiver(s) that comply with Canadian regulations. Operation is subject to two conditions: this device may not cause interference, and this device must accept any interference. This equipment complies with RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
• Page 6: ©2023 Daikin Applied, Minneapolis, MN. All rights reserved throughout the world. IM 1339-1 • DKN509 Wireless Thermostat