CYDATA DAISY Wi-Fi Enabled Thermostat Installation Guide
INSTALLING THERMOSTAT
Important! Check wire terminal compatibility with User Guide before starting installation.
Inside your Daisy thermostat box.
1. Daisy Wi-Fi Thermostat
3:37 PM
30%
2. Thermostat Base
3. Mounting Hardware
4. Quick Guide
Set
Heat Auto
Mode Fan
78
5. Wiring Labels
Important! Switch the power OFF to your HVAC
systems at the breaker box or the system switch to
protect your system.
OR
WARNING: This thermostat works with common 24 volt
system. It will not work with millivolt systems or with 120/240
volt systems such as baseboard electric heat.
HVAC system
power switch
NOTICE: To avoid possible compressor damage, do not run air
conditioner if the outside temperature drops below 50˚F (10˚C)
Circuit breaker box
2
Leave wires connected and remove old
thermostat from wall.
Take photos of wire connections
to reference later on.
MERCURY NOTICE: Do not place your old thermostat in the
trash if it contains mercury. Contact the Thermostat Recycling
1-800-238-8192 for information on how and where to
properly and safely dispose of your old thermostat.
3
Label the wires.
Do not label wires by color. Use the tags included
to label as you disconnect each wire. Wires should
be labeled according to your existing thermostat
terminal assignments, not by color.
Note: Blank tags are provided to write the terminal
label if you find no matching tags exist.
RC
W
R
Y
C
DAISY Wi-Fi Programmable Thermostat / INSTALL GUIDE
2
| General | Details |
|---|---|
| Name | CYDATA DAISY Wi-Fi Enabled Thermostat Installation Guide |
| Make | CYDATA |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.37 MB |

CYDATA CY917B Daisy Wi-Fi Thermostat User Guide


















