Home > COMPUTHERM > COMPUTHERM Q5RF Multi Zone Wireless Digital Room Thermostat Instruction Manual

COMPUTHERM Q5RF Multi Zone Wireless Digital Room Thermostat Instruction Manual

sired temperature to be maintained at the place where the  
thermostat has been installed can be set in steps of 0.5 °C.  
Approximately 6 seconds after setting the room tempera-  
ture to be maintained, the device automatically switches to  
normal mode. The notice “SET” disappears from the bottom  
right corner of the display, and once again the current room  
temperature and the notice “ROOM” are displayed.  
The previously set temperature can be freely changed any  
time using the  
and  
buttons. Always the last set  
temperatures are in effect.  
5. OPERATION OF THE INSTALLED  
THERMOSTAT  
The thermostat controls the device connected to it (e.g. gas boiler  
or pump) based on the temperature measured by it and the cur-  
rently set temperature, taking into account the switching sensitivity  
of the thermostat (factory default ±0.2 °C). This means that if the  
thermostat is set to heating mode and 22 °C, then with a switching  
sensitivity of ±0.2 °C the connection points NO and COM of the re-  
ceiver output relay are closed below 21.8 °C (heating is turned on)  
and 230 V AC is displayed on the output for that zone and NO and  
COM opened at temperatures above 22.2 °C (heating is turned off)  
- 13 -  
GeneralDetails
NameCOMPUTHERM Q5RF Multi Zone Wireless Digital Room Thermostat Instruction Manual
MakeCOMPUTHERM
LanguageEnglish
FiletypePDF (Download)
File size0.32 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
COMPUTHERM E800RF Multizone Wi-Fi Thermostat Instruction Manual
COMPUTHERM E800RF Multizone Wi-Fi Thermostat Instruction Manual
COMPUTHERM Q20 Programmable Digital Room Thermostat Instruction Manual
COMPUTHERM Q20 Programmable Digital Room Thermostat Instruction Manual