Home > Bosch > BOSCH RT20 RF Room Thermostat User Manual

BOSCH RT20 RF Room Thermostat User Manual

Installation  
During the installation, it is only necessary to connect the  
receiver to the boiler and set the desired time and date for the  
thermostat.  
2.4 Simplified EU Declaration of Conformity  
regarding radio equipment  
Bosch Thermotechnik GmbH hereby declares, that the TR20  
RF Room Thermostat product described in these instructions  
complies with the Directive 2014/53/EU.  
3.1 Installation location  
Please note the following when choosing the installation  
location:  
The complete text of the EU Declaration of Conformity is  
available on the Internet: worcester-bosch.co.uk.  
•
The appliance must be installed in a dry and temperature  
stable place.  
2.5 Product data on energy consumption -  
EU Regulations  
The following product data satisfies the requirements of the EU  
Regulations No. 811/2013, No. 812/2013, No. 813/2013  
and No. 814/2013 supplementing Directive 2010/30/EU.  
Avoid installing near heat sources and over-cooling or over-  
heating areas.  
2.6 Product data on energy consumption -  
ErP Directive  
•
•
The average wireless communication range between the  
thermostat and the receiver is 100 meters in the open area  
and 30 meters in the room.  
The product data specified comply with the requirements of EU  
Regulation No. 811/2013 as a supplement to ErP Directive  
2017/1369/EU. The class of the temperature controller is  
required to calculate the central heating energy efficiency of an  
integrated system and is for this reason incorporated into the  
system data sheet.  
Pay attention to any metallic elements in the area that might  
weaken or change the wireless communication between  
thermostat and receiver.  
Function of control unit  
Class1) [%]1),2)  
1.0  
The wireless communication range values may vary depending  
on the obstacles in the room.  
Room temperature-  
dependent, On/Off control  
I
Table 4 Product data for the energy efficiency of the user  
interface  
Delivery condition  
1) Classification of the user interface according to EU  
Regulation 811/2013 for the identification of integrated  
systems  
2) Contribution to seasonal energy efficiency of central  
heating in %  
3
Installation  
Pairing  
0010042936-001  
The pairing of the thermostat and the receiver is a factory  
default setting.  
Fig. 3  
Installation location  
Make sure that the thermostat and receiver are paired and  
check if the communication signal is normal.  
The red LED or green LED of the receiver will flash fast and  
slowly alternately when the signal is insufficient.  
TR20 RF Room Thermostat – 6721844607 (2022/03)  
23  
GeneralDetails
NameBOSCH RT20 RF Room Thermostat User Manual
MakeBosch
LanguageEnglish
FiletypePDF (Download)
File size4.26 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
BOSCH BCC110 Connected Control Wi-Fi Thermostat User Manual
BOSCH BCC110 Connected Control Wi-Fi Thermostat User Manual
BOSCH RT_II_230V Room Thermostat Instructions
BOSCH RT_II_230V Room Thermostat Instructions
BOSCH Smart Home Room Thermostat Instruction Manual
BOSCH Smart Home Room Thermostat Instruction Manual
BOSCH BCC110 Connected Control Thermostat Instruction Manual
BOSCH BCC110 Connected Control Thermostat Instruction Manual
BOSCH 6721807275 Smart Radiator Thermostat Installation Guide
BOSCH 6721807275 Smart Radiator Thermostat Installation Guide
BOSCH Thermostat atmosphere Smart Home 230 V Instruction Manual
BOSCH Thermostat atmosphere Smart Home 230 V Instruction Manual
BOSCH 8750000270 Radiator Thermostat II Smart Home Radiator Thermostat Instructions
BOSCH 8750000270 Radiator Thermostat II Smart Home Radiator Thermostat Instructions
BOSCH II 230V Room Thermostat Instruction Manual
BOSCH II 230V Room Thermostat Instruction Manual
BOSCH Radiator Thermostat Instructions
BOSCH Radiator Thermostat Instructions
BOSCH BCC110 Thermostat User Guide
BOSCH BCC110 Thermostat User Guide

BOSCH RT20 RF Room Thermostat User Manual