Home > Blue Universal > Blue Universal OH-1202 Touchscreen Thermostat Instruction Manual

Blue Universal OH-1202 Touchscreen Thermostat Instruction Manual

THERMOSTAT QUICK REFERENCE  
Home Screen Description  
Figure 8 – Home Screen Display  
Room  
Temperature  
Day of Week  
Set Temperature  
Time of Day  
Note: If  
is displayed, the  
Temperature  
thermostat is battery powered.  
When battery power remaining  
UP/Down used for  
modifying setpoint  
as well as to  
System  
Switch  
is approximately half,  
be displayed. If the home is  
will  
navigating the menus  
going to be unoccupied for an  
extended period (over 3 months)  
Fan  
Switch  
and is displayed, the batteries  
should be replaced before leaving.  
Menu key for entering  
different modes such as  
Cleaning, Configuration, Set  
Time and Set Schedule  
Battery Level Indicator  
Indicating the current power level  
of the 2 “AA” batteries.  
Full power remaining.  
Indicates when  
thermostat is calling  
for Heat or Cool  
Half power remaining.  
Change  
The batteries should be replaced at this time.  
Programming and Configuration Items  
Figure 9 – Programming & Configuration Items  
11  
Displays and "Keypad Lockout" when in keypad  
lockout mode.  
1
15  
16  
10  
Displays and "Temperature Limit" and "Keypad  
Lockout" when limited range is activated and locked.  
Displays only "Temperature Limit" when limited range  
is activated.  
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
3
3
3
2
3
3
3
3
3
3
3
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
3
4
5
6
7
8
9
0
1
3
4
5
6
7
8
9
20  
9
2
3
4
5
Indicates period of day being programmed.  
RUN SCHEDULE (run program) key.  
SET TIME key or HOLD temperature key.  
8
1
2
17  
Displays "Change Filter"/"Change UV Lamp" when  
the system has run for the programmed filter/UV lamp  
time period as a reminder to change or clean your filter  
or to replace UV lamp.  
13  
12  
19  
3
15  
6
7
COPY key or INSTALLER CONFIG key.  
CLEAN DISPLAY key allows 30 seconds to wipe off  
the display or ADVANCE DAY key for programming.  
18  
5
4
6
7
Used in programming to set time and in configuration  
menu to change selections.  
8
9
Savings" display indicates the feature is active.  
"Hold Until" indicates the time when a temporary hold  
"Remote" indicates that the indoor remote temperature  
sensor, is being accessed. "Outdoor Remote" indi-  
cates the outdoor remote temperature sensor is being  
accessed.  
15  
period will end.  
"Hours" and "Days" displays during steps in installer  
10  
11  
configuration.  
Display time, remote temperature.  
16  
17  
The words "Hold At" are displayed when the  
thermostat is in the HOLD mode. "Temporary Hold  
At" is displayed when the thermostat is in a temporary  
HOLD mode.  
"Heat Pump" displays when the system configuration  
is set in HP1/HP2.  
"Call for Service" indicates a fault in the heating/cooling  
systems. It does not indicate a fault in the thermostat.  
18  
"System On" indicates when heating or cooling stage  
is energized. "+2" indicates when a second stage is  
energized.  
12  
19 Auto Schedule key for Auto Schedule function  
In Configuration Menu, shows screen number. If blank,  
20  
thermostat is earlier model and requires instruction sheet  
37-6753D.  
"Copy" indicates the copy program feature is being  
13  
14  
used during programming.  
A steady "Cool Savings" display indicates the feature  
is enabled in the installer menu. A flashing "Cool  
4
GeneralDetails
NameBlue Universal OH-1202 Touchscreen Thermostat Instruction Manual
MakeBlue Universal
LanguageEnglish
FiletypePDF (Download)
File size0.4 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

Blue Universal OH-1202 Touchscreen Thermostat Instruction Manual