Home > aube > aube TH114-AF-GA Non-Programmable Thermostat Owner’s Manual

aube TH114-AF-GA Non-Programmable Thermostat Owner’s Manual

TH114-AF-GA / TH114-AF-GB  
Testing the ground fault protection  
To ensure the ground fault protection is always in working order, test it once the thermostat is installed  
and on a monthly basis thereafter.  
Increase the set temperature above the actual temperature to start heating.  
Wait for the heating indicator to appear on the screen.  
TEST button/light  
Press the TEST button.  
TEST  
If the TEST light does NOT turn on, the test has failed. Cut power to the  
heating system at the main electrical panel, have an electrician verify the  
installation and, if necessary, replace the thermostat.  
If the TEST light turns on, continue the test.  
M39038  
Switch the thermostat to Off then back to On.  
If the TEST light turns off, the test has passed. Set the thermostat back to the desired tempera-  
ture. The test is now completed.  
If the TEST light remains on, the test has failed. Continue with the rest of the procedure.  
Switch the heating system to off then back to on at the main electrical panel.  
Repeat the test. If the test fails again, cut power to the heating system at the main electrical panel,  
have an electrician verify the installation and, if necessary, replace the thermostat.  
13  
GeneralDetails
Nameaube TH114-AF-GA Non-Programmable Thermostat Owner’s Manual
Makeaube
LanguageEnglish
FiletypePDF (Download)
File size0.69 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
aube Electronic Thermostat TH131 Owner’s Manual
aube Electronic Thermostat TH131 Owner’s Manual
aube TH146-P-2H1C Programmable Thermostat Installation Guide
aube TH146-P-2H1C Programmable Thermostat Installation Guide

aube TH114-AF-GA Non-Programmable Thermostat Owner’s Manual