Home > Telethings > telethings teleRelays-2L Device Thermostat User Manual
telethings teleRelays-2L Device Thermostat User Manual
Telethings
3. WORK PRINCIPLE OF DEVICE
The teleRelays-2L device establishes two-way communication with the server. The
device sends the current states of the relay to the server, and receives commands from the
server sent by the user from a special platform. Based on the received commands, the device
controls the system to which it is connected by activating/deactivating a certain relay.
The teleRelays-2L device can be controlled in two ways:
using one of the IoT devices (e.g. teleButton) or
using the Telethings IoT Cloud platform
If the teleRelays-2L device is controled using an IoT device, then the pairing of that IoT device
with the teleRelays-2L device can be done using the Telethings IoT Cloud platform.
It is important to emphasize that controlling the teleRelays-2L device via the Telethings IoT
Cloud platform is possible even if the same device is controlled via a specific IoT device.
Since teleRelays-2L belongs to the C class of devices, the commands sent from the server
to the device are executed with minimal delay caused by the LoRaWAN interface. The
maximum delay in command execution is up to 2 seconds.
5
| General | Details |
|---|---|
| Name | telethings teleRelays-2L Device Thermostat User Manual |
| Make | Telethings |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.31 MB |

telethings teleRelays-2D Tele Thermostat User Manual

telethings 2D Smart LoRaWAN Thermostat User Manual

telethings TELESWITCH – 2L Smart LoRaWAN Thermostat User Manual

























