Home > Telethings > telethings teleRelays-2L Device Thermostat User Manual

telethings teleRelays-2L Device Thermostat User Manual

Telethings  
command – represents mode (ON, OFF, TOGGLE, DELAY ON ili DELAY OFF)  
relay_number – represents the number of the relay output in the range 0-7,  
depending on the number of relays on the device  
timer_value – represents the value of the time interval to maintain the selected  
relay states  
PORT  
NUMBER  
PACKAGE  
OFFSET  
DATA  
DATA SIZE IN BYTES  
command  
relay_number  
timer_value  
1
1
1
0
1
2
15  
Table 3. Reference for creating a data formatter for a packet sent from the server to the device  
5.2. Communication Flow  
The teleRelays-2L device communicates with the server every 15 minutes, if no  
commands have been sent from the server during that period. Also, the teleRelays-2L device  
communicates with the server 6 seconds after the last successfully received and executed  
command from the server.  
Also, the teleRelays-2L device constantly checks whether there are new data sent from the  
server.  
NOTE:  
If your own server is used, then it is not possible to use the Telething IoT Cloud shown in the  
previous chapter. In this case, scan the QR code on the device and send us an email with the  
device's serial number so that we can send you the device EUI and application key.  
11  
 
GeneralDetails
Nametelethings teleRelays-2L Device Thermostat User Manual
MakeTelethings
LanguageEnglish
FiletypePDF (Download)
File size0.31 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
telethings teleRelays-2D Tele Thermostat User Manual
telethings teleRelays-2D Tele Thermostat User Manual
telethings 2D Smart LoRaWAN Thermostat User Manual
telethings 2D Smart LoRaWAN Thermostat User Manual
telethings TELESWITCH – 2L Smart LoRaWAN Thermostat User Manual
telethings TELESWITCH – 2L Smart LoRaWAN Thermostat User Manual

telethings teleRelays-2L Device Thermostat User Manual