T10 Pro Smart Thermostat with Redlink Room Sensor
Troubleshooting
If you have difficulty with your thermostat, please try the following suggestions. Most problems can be corrected quickly and
easily.
Display is blank
•
•
•
•
•
Check circuit breaker and reset if necessary.
Make sure power switch for heating and cooling is on.
Make sure furnace door is closed securely.
Make sure the C-wire is connected.
Make sure R/Rc slider tab is set correctly (see wiring diagrams).
Heating or cooling system does not respond
•
Press Menu > System Mode > Heat > Done to set the system to Heat mode. Make sure the desired temperature is higher
than the indoor temperature.
•
Press Menu > System Mode > Cool > Done to set the system to Cool mode. Make sure the desired temperature is lower than
the indoor temperature.
•
•
•
•
Check circuit breaker and reset if necessary.
Make sure power switch for heating and cooling system is on.
Make sure furnace door is closed securely.
Wait 5 minutes for the system to respond.
Temperature settings do not change
Make sure desired temperature is within acceptable ranges:
•
•
Heat: 40 °F to 90 °F (4.5 °C to 32.0 °C)
Cool: 50 °F to 99 °F (10.0 °C to 37.0 °C)
Aux heat runs in cooling
For heat pump systems, verify there is not a wire attached to W on the UWP.
Cool runs with a call for heat
For heat pump systems, verify there is not a wire attached to W on the UWP.
Sensor will not connect
•
•
•
Press and hold Connect on the wireless sensor for 15 seconds. The LED will turn Amber. Return to the thermotat menu and
press Menu > Devices and Sensors. Follow the on-screen instructions to add the sensor.
31
33-00428–03
Specifications
Temperature Ranges
Regulatory Information
FCC REGULATIONS
§ 15.19 (a)(3)
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received,
including interference that may cause undesired operation.
•
•
Heat: 40 °F to 90 °F (4.5 °C to 32.0 °C)
Cool: 50 °F to 99 °F (10.0 °C to 37.0 °C)
Operating Ambient Temperature
32 °F to 120 °F (0 °C to 48.9 °C)
Shipping Temperature
-20 °F to 120 °F (-28.9 °C to 48.9 °C)
Operating Relative Humidity
5% to 90% (non-condensing)
Humidity setting range
10% to 60% RH.
Dehumidity setting range
•
IC REGULATIONS
RSS-GEN
This device complies with Industry Canada’s license-exempt
RSSs.
•
•
Operation is subject to the following two conditions:
1. This device may not cause interference; and
2. This device must accept any interference, including
interference that may cause undesired operation of the
device.
•
•
Originally 40% to 80% RH. Lowered to 25% RH min on
Oct 3 2019. Also updated via app.
FCC Warning (Part 15.21) (USA only)
Physical Dimensions in inches (mm) (H x W x D)
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
•
•
•
•
•
T10 PRO Wi-Fi Thermostat:
4.9” x 3.7” x 0.93” (125.4 x 94.1 x 23.68)
UWP Mounting System (included):
2-9/32” x 2-13/64” x 2-43/64” (58 x 56 x 10)
This product should not be disposed of with other household
waste. Check for the nearest authorized collection centers
or authorized recyclers. The correct disposal of end-of-life
equipment will help prevent potential negative consequences
for the environment and human health.
Wireless temperature, humidity, and motion sensor:
2.6” x 2.6” x .78” (66.25 x 66.25 x 19.7)
Cover Plate (included with THX321WFS2001W):
5 11/64” x 5 1/2” x 11/16” (131.4 x 139.7 x 17.5)
Cover Plate (included with THX321WF2003W):
6 7/64” x 6 7/64” x 9/32” (155 x 155 x 7)
Electrical Ratings
Terminal
Voltage
(50/60Hz)
Running
Current
W Heating
20-30 Vac
20-30 Vac
20-30 Vac
20-30 Vac
20-30 Vac
20-30 Vac
20-30 Vac
20-30 Vac
0.02-1.0 A
0.02-1.0 A
0.02-0.5 A
0.02-1.0 A
0.02-1.0 A
0.02-0.5 A
0.02-0.5 A
0.02-0.5 A
W2 (Aux) Heating
E Emergency Heat
Y Compressor Stage 1
Y2 Compressor Stage 2
G Fan
O/B Changeover
L/A Input
U
20-30 Vac
0.02-0.5 A
Power Consumption
3 VA
33-00428–03
32
| General | Details |
|---|---|
| Name | T10 Pro Smart Thermostat with Redlink Room Sensor |
| Make | Honeywell |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.57 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Honeywell T6 Pro Programmable Thermostat User Manual
Honeywell D1-528 Direct Thermostat Installation Guide
Honeywell FocusPRO P200 Programmable Thermostat User Guide
Honeywell RCHT8610WF Series Smart Thermostat Installation Guide
Honeywell T9 Smart Thermostat Installation Guide
Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide
Honeywell TL116A Thermostat Installation Guide
Honeywell TH6320WF2003 Lyric T6 Pro Wi-Fi Programmable Thermostat User Guide
Honeywell RTH9580 Wi-Fi Color Touchscreen Programmable Thermostat User Guide
Honeywell Smart Color Touchscreen Programmable Thermostat RTH9590 User Manual
COMAP L151002001 Smart Home Thermostat User Manual
GENERAL SENNA 300S Smart Room Thermostat User Manual
Honeywell Lyric Thermostat THP2400A1019 Installation Guide
KETOTEK LL0269 WiFi Digital Heating Thermostat User Manual
Livn 147 Thermostat User Guide
heatmiser neoStat-e Electric Floor Heating Thermostat Instructions
APATOR TH 480 Bi Metallic Thermostat Instruction Manual
ENGO CONTROLS E901 Wireless Programmable Smart Wifi Thermostat User Manual
TECH EU-295 Underfloor Heating Room Thermostat User Manual
DELTA 8000 Heating Thermostat Instructions