T10 Pro Smart Thermostat with Redlink Room Sensor
Auto Changeover operation
Auto changeover is available if the thermostat is configured for at least 1 heat stage and 1 cool stage and the installer enabled
auto changeover.
When configured this way, you can select “Auto” as one of the options under “System mode”.
When in auto mode, the customer can always set the heat and cool setpoint to the same temperature, regardless of the
differential setting although most customer prefer to have a cool setpoint that is at least 3 degrees above the heat setpoint.
When configured for 0 differential by the installer, we enforce a 1.5°F differential behind the scenes to ensure the heat doesn’t
come on after cooling shuts off or vice-versa.
The differential is the minimum number of degrees the temperature needs to rise or fall before switching from heat to cool while
in auto changeover mode. Example: With a 3 degree differential, If heat and cool were both set for 70, and heat had been used
last, the temperature would need to rise at least 3 degrees above the heat setpoint before the thermostat would turn on cooling.
Then it would cycle cooling on and off to maintain setpoint and the temp would need to drop at least 3 degrees below the cool
setpoint before heat could come on.
If the AC is used for dehumidification then we enforce an additional temp drop below the overcooling amount, prior to switching
back to heat.
Em Heat mode
Emergency heat runs when you manually switch the thermostat to the em heat mode. When the thermostat is in emergency heat
mode, the heat pump is locked out. When the thermostat is set to em heat mode, the heat pump is locked out and the backup
heat is used to maintain the heat setpoint.
Emergency heat mode is only available when the thermostat was configured for a heat pump with Backup heat by the installer.
From home screen touch the menu icon and then “system Mode”. You can set the thermostat to heat, off, cool, emergency heat,
or auto (auto only available if configured by installer).
9
33-00428–03
| General | Details |
|---|---|
| Name | T10 Pro Smart Thermostat with Redlink Room Sensor |
| Make | Honeywell |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.57 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Honeywell T6 Pro Programmable Thermostat User Manual
Honeywell D1-528 Direct Thermostat Installation Guide
Honeywell FocusPRO P200 Programmable Thermostat User Guide
Honeywell RCHT8610WF Series Smart Thermostat Installation Guide
Honeywell T9 Smart Thermostat Installation Guide
Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide
Honeywell TL116A Thermostat Installation Guide
Honeywell TH6320WF2003 Lyric T6 Pro Wi-Fi Programmable Thermostat User Guide
Honeywell RTH9580 Wi-Fi Color Touchscreen Programmable Thermostat User Guide
Honeywell Smart Color Touchscreen Programmable Thermostat RTH9590 User Manual
EPH CONTROLS CDTP2 Hardwired Room Thermostat Instruction Manual
GENERAL LIFE HT330S Digital Room Thermostat User Manual
Honeywell RTH9580 Wi-Fi Color Touchscreen Programmable Thermostat User Guide
CYDATA CY917B Daisy Wi-Fi Thermostat User Guide
SUNTOUCH SunStat 1140-01 R4 Relay Thermostat User Manual
Schneider Electric CCTFR6100Z3 Wiser Radiator Thermostat User Manual
SUNRICHER SR-ZG9092A Zigbee Heating Thermostat Installation Guide
Braemar BRA639659 Manual Digital Thermostat Instruction Manual
WILLIAMS P322016 Thermostat Instruction Manual
Danfoss 088U0210 CF-RS Standard Room Thermostat Instruction Manual