Home > Honeywell > T10 Pro Smart Thermostat with Redlink Room Sensor

T10 Pro Smart Thermostat with Redlink Room Sensor

IAQ REMINDERS  
You can set up IAQ reminders in the thermostat to remind users when filters, pads, UV bulbs, etc. need cleaning or replacement.  
The available reminders vary based on the ISU settings. For example, if the thermostat is configured to control a flow through  
humidifier, it will have the humidifier pad reminder but not the humidifier tank reminder:  
Air Filter 1  
Air Filter 2  
Electronic Air Cleaner Pre-Filter  
Electronic Air Cleaner Post-Filter  
Humidifier Tank / Water Filter  
Humidifier Pad  
Dehumidifier Filter  
Ventilator Core  
Ventilator Filter  
UV Bulb 1  
UV Bulb 2  
Reminders that are displayed under preferences will change based on the IAQ equipment installed. Reminders for equipment  
that is already set up can be set using the steps below. Reminders for IAQ equipment that is not yet set up must be turned on  
from the installer setup.  
If you want to disable the alert, go MENU-PREFERENCES-REMINDERS to turn reminder off.  
NOTE: Air Filter, Humidifier Pad, Dehumidifier Filter, and Ventilator Filter are displayed under Preferences even if they have not  
been set up. Humidifier Pad is not displayed if a steam humidifier has been installed.  
To access or adjust the reminder settings  
1. Touch any part of the display to wake the thermostat.  
2. Touch the MENU icon at the bottom of the screen.  
3. Scroll down and select “preferences.”  
4. Select the reminder you want to set from the list (shown above).  
5. Press ^ or v to set the timer length. Ranges, increments, and units will change based on the reminder.  
6. Press Done to save the reminder.  
7. Press Reset Timer when you have completed the recommended maintenance or you can extend the timer setting to turn off  
the alert and remind you later to do the recommended maintenance.  
Repeat these steps for all reminders you want to set  
NOTE: When set for run time days, the thermostat tracks the amount of time the fan has run and compares that time against the  
number of run time days selected. Fan run time is counted when there is a call for forced air heating, cooling, or fan.  
Dehum setting range: 25% RH to 80% RH.  
Models made prior to October 2019 had a minimum of 40% RH but if connected to Wi Fi and registered to Honeywell Home App  
the minimum setting is automatically updated to 25% RH. This would not affect any range stop settings.  
33-00428–03  
26  
Wireless Sensor information  
When one or more wireless temperature/humidity/motion sensors have been linked to the thermostat by the installer, you can  
check the status of the sensor using the following steps.  
Checking the status of a sensor  
1. Touch any part of the display to wake the thermostat.  
2. Touch the MENU icon at the bottom of the screen.  
3. Scroll down and touch “Devices and Sensors”.  
View the sensors, add a sensor or identify a sensor  
To identify a sensor, touch “Identify” and then remove the cover from a sensor and press the button on that sensor. The  
thermostat will indicate the room name of that sensor.  
Touch a sensor name from the list to get information on that sensor  
71°  
72°  
3
2
3
2
69°  
3
4
72°  
Touch Motion Sensitivity to adjust setting  
Touch “Blink lights” to make the light on the selected sensor flash for 5 seconds.  
27  
33-00428–03  
GeneralDetails
NameT10 Pro Smart Thermostat with Redlink Room Sensor
MakeHoneywell
LanguageEnglish
FiletypePDF (Download)
File size0.57 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
Honeywell T6 Pro Programmable Thermostat User Manual
Honeywell T6 Pro Programmable Thermostat User Manual
Honeywell D1-528 Direct Thermostat Installation Guide
Honeywell D1-528 Direct Thermostat Installation Guide
Honeywell FocusPRO P200 Programmable Thermostat User Guide
Honeywell FocusPRO P200 Programmable Thermostat User Guide
Honeywell RCHT8610WF Series Smart Thermostat Installation Guide
Honeywell RCHT8610WF Series Smart Thermostat Installation Guide
Honeywell T9 Smart Thermostat Installation Guide
Honeywell T9 Smart Thermostat Installation Guide
Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide
Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide
Honeywell TL116A Thermostat Installation Guide
Honeywell TL116A Thermostat Installation Guide
Honeywell TH6320WF2003 Lyric T6 Pro Wi-Fi Programmable Thermostat User Guide
Honeywell TH6320WF2003 Lyric T6 Pro Wi-Fi Programmable Thermostat User Guide
Honeywell RTH9580 Wi-Fi Color Touchscreen Programmable Thermostat User Guide
Honeywell RTH9580 Wi-Fi Color Touchscreen Programmable Thermostat User Guide
Honeywell Smart Color Touchscreen Programmable Thermostat RTH9590 User Manual
Honeywell Smart Color Touchscreen Programmable Thermostat RTH9590 User Manual

T10 Pro Smart Thermostat with Redlink Room Sensor