BARD THERMOSTAT Menu Driven Display 1120-445A User Manual

1

2

3

4

5

6

7

8

997-060180-21a  

User’s Manual  

8403-060  

Menu Driven  

Display 1120-445A  

8/08/05  

OUTDOOR  

93°  

8:45 AM  

FAN AUTO  

HEATING  

I.  

CONTROLLER OPERATION  

ADJUSTING TEMPERATURE (Temporary Override when in Programmable mode)  

1. Before you can adjust the temperature, a MODE must be selected. If you are already in a Heating or Cooling mode, then skip to  

step 5.  

2. To select a MODE, use the keypad arrows to scroll to MODE, and then press the center button ■ on the key pad to enter the  

operating mode menu.  

73°  

AUTO  

SETPOINT  

HEAT 62  

COOL 85  

TEMP  

RH  

MODE FAN MENU  

3. Select the desired mode by scrolling up or down, with the arrows ▲▼, and then press the center button ■ on the keypad to  

enter into that mode.  

Figure1  

4.  

You are now returned to the Main Menu and Figure 1 is a similar view. NOTE: Outdoor temperature is only displayed if an outdoor sensor  

is installed.  

5. To increase the temperature set point, use the arrow up button ▲. To decrease the set point, use the arrow down button ▼. Press the center  

button ■ on the key pad for the new set point to be effective.  

SETTING DATE AND TIME  

1. From the Main Menu, scroll to MENU and press the center button ■  

on the keypad.  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	BARD THERMOSTAT Menu Driven Display 1120-445A User Manual
Make	Bard
Language	English
Filetype	PDF (Download)
File size	0.63 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• Bard

BARD THERMOSTAT Menu Driven Display 1120-445A User Manual Overview

Summary of Contents

• Page 1: User’s manual Controller operation Adjusting temperature (temporary override when in programmable mode) Before you can adjust the temperature, a mode must be selected. To select a mode, use the keypad arrows to scroll to mode, and then press the center button on the keypad to enter the operating mode menu. Select the desired mode by scrolling up or down, with the arrows, and then press the center button on the keypad to enter into that mode. You are now returned to the main menu. To increase the temperature set point, use the arrow up button. To decrease the set point, use the arrow down button. Press the center button on the keypad for the new set point to be effective. Setting date and time From the main menu, scroll to menu and press the center button on the keypad.