Home > StelPro > STELPRO UT202NP Series Non-Programmable Electric Thermostat Owner’s Manual

STELPRO UT202NP Series Non-Programmable Electric Thermostat Owner’s Manual

SECURITY MODE  
It is possible to impose a maximum temperature set point by activating this mode.  
Then, it becomes impossible to exceed this set point, regardless of the current  
mode (Day/Night). However, it is still possible to lower the set point at your dis-  
cretion.  
PROCEDURES TO ACTIVATE THE SECURITY MODE  
1. To activate the Security option, adjust the set point to the desired maximum tem-  
perature.  
2. Simultaneously press down the two buttons for more than 13 seconds, until the  
icon appears (note that the °C or °F symbol will blink after 3 seconds, but  
continue to keep both buttons pressed down).  
3. Release the buttons. The thermostat is now locked.  
PROCEDURES TO DEACTIVATE THE SECURITY MODE  
1. To deactivate the Security mode, start by cutting off the thermostat power at circuit  
breaker and wait at least 20 seconds.  
2. Turn the thermostat power back on and the  
5 minutes.  
icon will blink for a maximum of  
3. Simultaneously press down both buttons for 13 seconds. After 13 seconds, the  
icon will disappear and the degrees symbol (°C or °F) will stop blinking, indicating  
that the Security mode is deactivated. Release the buttons.  
PARAMETERS SAVING AND POWER FAILURES  
The thermostat saves some parameters in a non-volatile memory to be able to  
recover them after being shut off (a power failure, for example). These parameters  
are the set point, the state of the Security mode, the maximum symbol of the  
Security mode and the Celsius/Fahrenheit symbol. These parameters are saved  
every minute if any changes are made.  
The Security mode is reactivated if it was previously activated. However, the icon  
will blink for 5 minutes, during which it is possible to deactivate the Security mode  
by pressing down both buttons simultaneously for 13 seconds. If this is not done,  
the Security mode will remain activated and the icon will stop blinking.  
9
GeneralDetails
NameSTELPRO UT202NP Series Non-Programmable Electric Thermostat Owner’s Manual
MakeStelPro
LanguageEnglish
FiletypePDF (Download)
File size0.25 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
STELPRO STF362NP Floor Heating Thermostat Owner’s Manual
STELPRO STF362NP Floor Heating Thermostat Owner’s Manual
STELPRO ST302P Programmable Electronic Thermostat Owner’s Manual
STELPRO ST302P Programmable Electronic Thermostat Owner’s Manual
STELPRO SAT402ZB Smart Thermostat User Guide
STELPRO SAT402ZB Smart Thermostat User Guide
STELPRO ST252NPFF Non-Programmable Electronic Thermostat Owner’s Manual
STELPRO ST252NPFF Non-Programmable Electronic Thermostat Owner’s Manual
STELPRO ST402PFF Programmable Electronic Thermostat Owner’s Manual
STELPRO ST402PFF Programmable Electronic Thermostat Owner’s Manual
STELPRO ASMC402 Maestro Zigbee Smart Programmable Thermostat User Guide
STELPRO ASMC402 Maestro Zigbee Smart Programmable Thermostat User Guide
STELPRO SIBTE12C Electronic Thermostat Owner’s Manual
STELPRO SIBTE12C Electronic Thermostat Owner’s Manual
STELPRO STZW402+ Electronic Thermostat for The Smart Home Owner’s Manual
STELPRO STZW402+ Electronic Thermostat for The Smart Home Owner’s Manual
STELPRO SIBTE13F Electronic Thermostat User Guide
STELPRO SIBTE13F Electronic Thermostat User Guide
STELPRO STCP MULTIPLE PROGRAMMING ELECTRONIC THERMOSTAT User Guide
STELPRO STCP MULTIPLE PROGRAMMING ELECTRONIC THERMOSTAT User Guide

STELPRO UT202NP Series Non-Programmable Electric Thermostat Owner’s Manual