SECURE radbot 1 Intelligent Radiator Thermostat Instruction Manual
Troubleshooting
PROBLEM
REASON
SOLUTION
Room gets too hot
Batteries have run out
Replace with new batteries
Radbot 1 has not been
Check connection and if loose,
push down Radbot 1 and tighten
retaining nut
tightened sufficiently to valve so the
pin is unable to close the valve
Radiator will
not turn off
Radbot 1 has not been
tightened sufficiently to
valve - pin not able to close
valve
Check connection and if loose,
push down Radbot 1 and tighten the
retaining nut
Radbot 1 will not
respond to controls
Batteries depleted
Replace with new batteries
Check with customer support
Rapid flashing
LED and no other
activity
Device is mal-functioning due to
hardware/software fault
Room temperature
control seems
strange.
Batteries were left flat
or out for an extended
period, or the device
was moved to a new
room, and the device
has to re-learn time of
day and room use.
The device will re-learn over the
course of a few days.
Replace batteries before they
are completely exhausted
The device cannot
function due to
obstruction or blocking.
Check device is not covered by
objects (e.g. curtains) and ensure
adequate air circulation around
device.
Retaining ring has
not been tightened
sufficiently.
Tighten retaining ring.
Valve is loose on
radiator.
If still loose remove and reinstall
Radbot checking valve adaptor.
Pin was not fully
retracted during
installation.
14
| General | Details |
|---|---|
| Name | SECURE radbot 1 Intelligent Radiator Thermostat Instruction Manual |
| Make | SECURE |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.2 MB |

SECURE ThermoPlus PRT1 Programmable Room Thermostat Instruction Manual

SECURE ThermoPlus AS2 Programmable Room Thermostat Instruction Manual

SECURE H3747 Smart Programmable Thermostat Installation Guide





























