SANGAMO CHPWIFI Fort Programmable Thermostat User Guide
Thermostat Configuration
To configure the thermostat using its controls you will need to do the following:
(1) In standby mode indicated by the Thermostat displaying “
configuration menu.
”, long press “ ” to enter the
(2) The first item will display “ ”, press “ ” to enter the configuration for the first item.
(3) You can adjust the setting by pressing “ ” or “ ”.
(4) “ ” will flash, and then press “ ” will save current settings, and exit to the configuration menu.
(5) Use the “ ” or “ ” to select the configuration menu, and then press “ ” to enter the next
configuration, and follow the steps 3 & 4.
(6) Finally once all menus have been configured, long press “ ” to save and exit the configuration menu.
Restore factory settings:
After entering the configuration menu, press and hold both the “ ” and “
” buttons, to restore the
thermostat to factory settings, the thermostat will display “ ” and flash 3 times.
This will remove any custom configuration setting(s) and programming setting(s)
Displayed
Step No.
Press “ ” or “ ” to select
Descriptions
Temperature calibration
(Factory Default)
-4°C to +4°C
1
2
3
+20°C to +35°C
+5°C to +20°C
Select maximum setting temperature range
Select minimum setting temperature range
Start heating conditions:
When setting temperature -Room temperature ≥
0.5°C (0.5~3°C option), start heating.
Room temperature ≥ Setting temperature,
stop heating.
0.5°C to 3°C
4 / 6
4
Number of programming periods per day;
2 ON & 2 OFFs / 3 ON & 3 OFFs
5
Intelligent function (Optimal start)
Frost Protection function
6
7
8
Thermostat Relay Output
Thermostat LED Display option
ON: LEDs displays on Thermostat VIA app.
OFF: LEDs don’t display on Thermostat VIA app.
OFF: LED lights
9
5
| General | Details |
|---|---|
| Name | SANGAMO CHPWIFI Fort Programmable Thermostat User Guide |
| Make | SANGAMO |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.52 MB |





















