SALUS RT310TX Wireless Programmable Thermostat User Guide
Change the Setpoint temperature
Pairing the RT310TX with the Receiver
Installer Mode
Note: If you are using the RT310RF pack, the pairing between the thermostat and the receiver
is already done.
3 sec
3 sec
If you bought the RT310TX and RXRT510 separately or if you want to re-pair thermostat with the
receiver, make sure that the device is disconnected from the power supply and the switches on the
receiver have been set to AUTO and ON. Then connect the receiver to the power supply and wait for
the red LED to light steadily. Then switch to the OFF position and again to ON position quickly. The
red flashing LED will confirm entering the pairing mode.
3 sec
Actual room temperature.
Press
or
to set the temperature.
Begin the pairing process
Press three buttons at the same time
for 3 seconds.
dxx
Function
Parameter
Default
value
d01 Temperature display increments
d02 Temperature offset
0.1°C or 0.5°C
+/- 3.0°C
0.5°C
0.0°C
5.0°C
TEST / PAIRING
TEST / PAIRING
d03 Frost Protection setpoint temperature
5.0°C - 17.0°C
Press and hold TEST / PAIRING
button for 3 seconds.
Pairing process can take up to 9 minutes.
Actual room temperature.
3 sec
End the pairing process
Reset of the RT310 thermostat
Frost Protection
Press the RESET button once. You can use a paper clip.
Your thermostat will be reset and will start up automatically.
RESET
TEST / PAIRING
TEST / PAIRING
Reset of the RT310TX thermostat
Once devices are successfully paired,
LED on the receiver will go solid red.
Press and hold TEST / PAIRING button
for 3 seconds to end the pairing
process.
Remove the batteries without pressing any button.
Wait 2 minutes and insert the batteries again.
Your device will be restarted.
3 sec
Press button to turn
On/Off frost protection.
3
When you want to change the batteries your device will use the
internal memory to backup your settings. You have 30 seconds
to change the batteries before losing your settings.
The Frostpoint temperature can be reviewed by pressing the UP button once, but can only be
changed in Installer Mode.
TEST
/
PAIRING
+
−
+
Test the pairing process
−
Sleep Mode
NOTE:
If you do not notice the “low battery” symbol displayed on the screen in time, it will shut down. In
this case, after removing the old batteries, it is necessary to wait 5 minutes before inserting the new
batteries. Otherwise, it is possible that a condenser will remain partially discharged and it can prevent
the thermostat from restarting.
3 sec
ON
OFF
AUTO
MANUAL
TEST / PAIRING
SALUS Controls plc
SALUS House
Press TEST / PAIRING button
to check the connection with
the receiver.
3 sec
1 sec
Dodworth Business Park South,
Whinby Road, Dodworth,
Computime Group.
Barnsley S75 3SP, UK.
T: +44 (0) 1226 323961
SALUS Controls is a member of the
When Sleep Mode is active all the thermostat functions will be paused.
Maintaining a policy of continuous product
development SALUS Controls plc reserve
the right to change specification, design and
materials of products listed in this brochure
without prior notice.
E: sales@salus-tech.com
E: techsupport@salus-tech.com
ON
OFF
TEST / PAIRING
AUTO
MANUAL
For PDF Installation guide please go to
Press TEST / PAIRING button again
to return to the main screen.
1 sec
Press any button to stop the Sleep Mode.
Issue Date: June 2019
V020
| General | Details |
|---|---|
| Name | SALUS RT310TX Wireless Programmable Thermostat User Guide |
| Make | SALUS |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.24 MB |

SALUS IT800 WIFI Smart Thermostat Installation Guide

SALUS 091FLRF Wireless Room Thermostat User Guide

SALUS Thermostat Sensor TS600 User Guide

SALUS Thermostat and Smart Plug Installation Guide

SALUS Programmable Wired Thermostat VS30W/VS30B Installation Guide

SALUS Wired Thermostat Installation Guide

SALUS Wired Digital Thermostat – Non-programmable HTRS230 User Manual

SALUS RT520 Radiator Thermostat User Guide

SALUS RT310 Thermostat User Manual

SALUS Thermostat RT520 User Manual















