LENNOX EL18KCV Smart Wi-Fi Communicating Thermostat User Manual
FEATURES
PRECISE COMFORT® TECHNOLOGY (continued)
CONTROLS
Accumulator
Lennox® Communicating Control
• Advanced control
G
H
I
• Standard in all models
communicates information
about various operating
Compressor Crankcase Heater
• Prevents migration of liquid refrigerant into compressor
and ensures proper compressor lubrication
parameters in the air
conditioner to the Lennox®
Communicating Thermostat
to constantly maintain the
highest level of comfort,
Compressor Sound Dampening System
• Polyethylene compressor cover
• 2-inch thick batt fiberglass insulation
• All open edges sealed with one-inch wide hook and loop
fastening tape
performance and efficiency available
• Auto Configuration - On start-up the control automatically
sends a description of the unit to the Lennox®
Communicating Thermostat to automatically configure
the features available
DC Inverter Control
• Converts AC line voltage into
filtered variable DC voltage
• Control also features:
• Seven-Segment Display - Shows information about
outdoor unit type and capacity and also displays
alerts for common fault conditions (electrical and
mechanical)
• Provides continuous compressor
operation, while adjusting the
capacity according to indoor
temperature
• Low Voltage Protection - Prevents compressor
operation when voltage is not within the specified
range
• High pressure switch monitoring with provisions for
lockout
• Adjusts compressor output in
increments as small as 1%
• The accurate sensing of cooling
load prevents frequent changes
in capacity and ensures efficient,
economical operation
• Five-Strike lockout protection protects compressor
• Power Factor Correction (PFC) circuit monitors the DC
bus for high, low and abnormal voltage conditions to
protect the compressor
• Two LEDS (red and green) indicate inverter operating
status and aid in troubleshooting
• Noise filter reduces unwanted electromagnetic
interference (EMI)
• The inverter reactor (mounted separately) adds
inductance to the line between the inverter and the
compressor to limit current rise and protect the
compressor
• Liquid and suction line temperature and sensor
monitoring
• EEPROM storage of all local configurations
• Non-volatile memory storage of 100 alarm codes with
display of last 10 codes for troubleshooting
• Built-in low-ambient control
NOTE - Two RAST connectors for a conventional
heating/cooling thermostat are also provided for
connection to the control. A two-stage or single-
stage thermostat can be used.
Low Ambient Operation
• Air conditioner can operate down to 0°F outdoor air
temperature
NOTE - A freezestat is recommended for extra protection
during low ambient operation.
Climate IQ™ Technology
• Optimizes dehumidification settings for specific climates
to improve home comfort during cooling operation
Lennox® Communicating Thermostat Settings:
• Climate IQ (Auto) - Dry, Normal, Basic and Humid modes
are automatically set based on the difference between
the measured relative humidity and the relative humidity
setting
• All modes are selected on the Lennox® Communicating
Thermostat
Outdoor Air Temperature Sensor
• Used with Lennox® Communicating Thermostats
• Sensor allows thermostat to display outdoor
temperature
• Sensor is auto-detected when connected to thermostat
EL18KCV | 2 to 5 Ton Air Conditioner | Page 5
| General | Details |
|---|---|
| Name | LENNOX EL18KCV Smart Wi-Fi Communicating Thermostat User Manual |
| Make | Lennox |
| Language | English |
| Filetype | PDF (Download) |
| File size | 2.82 MB |

LENNOX L40 Smart Thermostat Owner’s Manual

LENNOX S40 Smart Thermostat User Guide

























