Lachin TDS72 Series WiFi Thermostat User Guide
1.Open the main control board, use a 3.5mm wide vertebral
slope to reach the depth of 4mm in the card slot, and lift it up
slightly to open the hook.
2.Remove the back cover and power supply, wire it correctly
according to the wiring diagram, and fix the back cover to the
cassette with M4 screws
3.Connect the lower cover cable to the upper cover board
4.Hang the upper two hooks at a 30-degree angle.Press the
two corners below the thermostat slightly to lock the upper
casing and the installation is complete.
Notice:Please strictly follow the wiring diagram and do not let
the water, mud and other debris enter the thermostat,otherwise
thethermostat will be damaged!
Description of display & icon
Power on/off
| General | Details |
|---|---|
| Name | Lachin TDS72 Series WiFi Thermostat User Guide |
| Make | Lachin |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.08 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Danfoss ECtemp 610 Electronic Thermostat Installation Guide
nVent RAYCHEM SENZ Wifi Programmable Floor Heating Thermostat User Guide
NOBO NTL4S 07 NTL Heater with Thermostat Instruction Manual
BEOK TDS21 Wi-Fi Thermostat User Manual
SALUS Digital Room Thermostat RT310/RT310RF Installation Guide
Robertshaw RS8210 Thermostat Installation Guide
PRO1 T771 Programmable Electronic Thermostat Instructions
Danfoss CET B-RF Wireless Electronic Hot Water Cylinder Thermostat Installation Guide
ASA Electronics ACTH12 Digital LCD Thermostat Instruction Manual
Honeywell RTH2510 Digital 7-day Thermostat Owner’s Manual