Home > Honeywell > Honeywell TH3110D1008 Non-Programmable Thermostat Instruction Manual

Honeywell TH3110D1008 Non-Programmable Thermostat Instruction Manual

Troubleshooting  
If you have difficulty with your thermostat, please try the following  
suggestions. Most problems can be corrected quickly and easily.  
Display is  
blank  
•Check circuit breaker and reset if necessary.  
•Make sure power switch at heating & cooling system is  
on.  
•Make sure furnace door is closed securely.  
•Make sure fresh AA alkaline batteries are correctly  
installed (see page 2).  
Heating  
•Set system switch to Heat. Make sure the temperature  
is set higher than the Inside temperature.  
•Set system switch to Cool. Make sure the temperature  
is set lower than the Inside temperature.  
or cooling  
system does  
not respond  
•Wait 5 minutes for the system to respond.  
Temperature Make sure heating and cooling temperatures are set to  
settings do  
not change  
acceptable ranges:  
•Heat: 40° to 90°F (4.5° to 32°C).  
•Cool: 50° to 99°F (10° to 37°C).  
“Cool On” or  
“Heat On” is  
flashing  
•Compressor protection feature is engaged. Wait 5  
minutes for the system to restart safely, without  
damage to the compressor.  
“Heat On” is  
not displayed  
•Set the System switch to Heat, and set the temperature  
level above the current room temperature.  
“Cool On” is  
not displayed  
•Set the System switch to Cool, and set the temperature  
level below the current room temperature.  
Specifications  
Temperature Ranges  
Input: 24 V~ @ 60 Hz, 1.0 A  
Heat: 40° to 90°F (4.5° to 32°C)  
Cool: 50° to 99°F (10° to 37°C)  
Operating Ambient Temperature  
32° to 120°F (0° to 48.9°C)  
Shipping Temperature  
Electrical Ratings  
System  
Voltage (50/60Hz) Running Current  
Heat (1st stage) 20-30 Vac  
0.02-1.0 A  
100 mA DC  
0.02-1.0 A  
0.02-1.0 A  
0.02-1.0 A  
(Powerpile)  
750 mV DC  
Emergency heat 20-30 Vac  
Auxiliary heat  
Cooling  
20-30 Vac  
-20° to 120°F (-28.9° to 48.9°C)  
Operating Relative Humidity  
5% to 90% (non-condensing)  
Physical Dimensions  
20-30 Vac  
3-13/16” H x 5-3/8” W x 1-1/4” D  
97 mm H x 137 mm W x 32 mm D  
7
GeneralDetails
NameHoneywell TH3110D1008 Non-Programmable Thermostat Instruction Manual
MakeHoneywell
LanguageEnglish
FiletypePDF (Download)
File size0.98 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
Honeywell T6 Pro Programmable Thermostat User Manual
Honeywell T6 Pro Programmable Thermostat User Manual
Honeywell D1-528 Direct Thermostat Installation Guide
Honeywell D1-528 Direct Thermostat Installation Guide
Honeywell FocusPRO P200 Programmable Thermostat User Guide
Honeywell FocusPRO P200 Programmable Thermostat User Guide
Honeywell RCHT8610WF Series Smart Thermostat Installation Guide
Honeywell RCHT8610WF Series Smart Thermostat Installation Guide
Honeywell T9 Smart Thermostat Installation Guide
Honeywell T9 Smart Thermostat Installation Guide
Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide
Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide
Honeywell TL116A Thermostat Installation Guide
Honeywell TL116A Thermostat Installation Guide
T10 Pro Smart Thermostat with Redlink Room Sensor
T10 Pro Smart Thermostat with Redlink Room Sensor
Honeywell TH6320WF2003 Lyric T6 Pro Wi-Fi Programmable Thermostat User Guide
Honeywell TH6320WF2003 Lyric T6 Pro Wi-Fi Programmable Thermostat User Guide
Honeywell RTH9580 Wi-Fi Color Touchscreen Programmable Thermostat User Guide
Honeywell RTH9580 Wi-Fi Color Touchscreen Programmable Thermostat User Guide

Honeywell TH3110D1008 Non-Programmable Thermostat Instruction Manual