Home > Honeywell > Honeywell TH3110D1008 Non-Programmable Thermostat Instruction Manual

Honeywell TH3110D1008 Non-Programmable Thermostat Instruction Manual

Installer Setup  
Follow the procedure below to  
configure the thermostat to match  
the installed heating/cooling system,  
and customize feature operation as  
desired.  
To begin, press and hold the s and  
t buttons until the display changes.  
•Press t to change settings.  
•Press s to advance to next  
Setup  
function.  
•Press and hold ts to exit and  
save settings.  
0
Setting  
1
Function  
number  
Setup function  
Settings & options (factory settings in bold)  
0
1
Gas, oil or electric heat with air conditioning  
Heat pump (5 minute compressor off time in heating and  
cooling)  
1
System type  
TH3110D only  
5
1
3
9
For gas or oil furnaces of less than 90% efficiency  
For steam or gravity systems  
For hot water systems & furnaces of over 90% efficiency  
For electric furnaces  
5
Heating cycle rate  
(CPH: cycles/hour)  
TH3110D only  
[Other cycle rate options: 2, 4, 6, 7, 8, 10, 11 or 12 CPH]  
5
1
3
9
For gas or oil furnaces of less than 90% efficiency  
For steam or gravity systems  
For hot water systems & furnaces of over 90% efficiency  
For electric furnaces  
6
8
Auxiliary heat  
cycle rate (CPH)  
TH3210D only  
[Other cycle rate options: 2, 4, 6, 7, 8, 10, 11 or 12 CPH]  
9
1
3
5
For electric emergency heat  
For steam or gravity systems  
For hot water systems & furnaces of over 90% efficiency  
For gas or oil furnaces of less than 90% efficiency  
[Other cycle rate options: 2, 4, 6, 7, 8, 10, 11 or 12 CPH]  
Emergency heat  
cycle rate (CPH)  
TH3210D only  
3
Recommended for most compressors  
[Other cycle rate options: 1, 2, 4, 5, or 6 CPH]  
9
Compressor  
cycle rate (CPH)  
0
1
Fahrenheit  
Celsius  
14 Temperature  
display  
5
Five-minute compressor off time  
[Other options: 0, 1, 2, 3 or 4-minute off time]  
15 Compressor  
protection  
Compressor Protection (Setup Function 15): Forces the compressor to wait a few minutes  
before restarting, to prevent damage. During the wait time, the message Cool On or Heat On  
(heat pumps only) will flash on the display.  
5
GeneralDetails
NameHoneywell TH3110D1008 Non-Programmable Thermostat Instruction Manual
MakeHoneywell
LanguageEnglish
FiletypePDF (Download)
File size0.98 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
Honeywell T6 Pro Programmable Thermostat User Manual
Honeywell T6 Pro Programmable Thermostat User Manual
Honeywell D1-528 Direct Thermostat Installation Guide
Honeywell D1-528 Direct Thermostat Installation Guide
Honeywell FocusPRO P200 Programmable Thermostat User Guide
Honeywell FocusPRO P200 Programmable Thermostat User Guide
Honeywell RCHT8610WF Series Smart Thermostat Installation Guide
Honeywell RCHT8610WF Series Smart Thermostat Installation Guide
Honeywell T9 Smart Thermostat Installation Guide
Honeywell T9 Smart Thermostat Installation Guide
Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide
Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide
Honeywell TL116A Thermostat Installation Guide
Honeywell TL116A Thermostat Installation Guide
T10 Pro Smart Thermostat with Redlink Room Sensor
T10 Pro Smart Thermostat with Redlink Room Sensor
Honeywell TH6320WF2003 Lyric T6 Pro Wi-Fi Programmable Thermostat User Guide
Honeywell TH6320WF2003 Lyric T6 Pro Wi-Fi Programmable Thermostat User Guide
Honeywell RTH9580 Wi-Fi Color Touchscreen Programmable Thermostat User Guide
Honeywell RTH9580 Wi-Fi Color Touchscreen Programmable Thermostat User Guide

Honeywell TH3110D1008 Non-Programmable Thermostat Instruction Manual