Honeywell T7350 Programmable Thermostat Owner’s Manual
•
•
Intelligent Fan™ feature energizes fan
continuously in the Occupied periods. Fan
can also be configured for conventional heat
or electric heat fan operation.
Remote sensor capability for temperature
(including outdoor air and discharge air) and
humidity sensors.
P+I+D control minimizes temperature
fluctuations.
Recovery ramping control automatically
optimizes equipment start times based on
building load.
Thermostat Interface Module (TIM)
connections to thermostat from PDA for
advanced configuration, programming, etc.
Universal Versaguard™ Thermostat guards
available.
FEATURES
•
Typically used in buildings (including:
restaurants, shopping malls, office buildings
and banks) under 55,000 square feet.
•
For single zone rooftop units, split systems,
heat pumps or hot/chilled water systems.
•
•
•
•
7-day programming.
Two Occupied and two Not Occupied
periods per day.
•
•
•
Keypad multi-level lockout available with all
models.
Individual heat and cool setpoints available
for Occupied and Not Occupied periods.
Convenient overrides allow temporary
setpoint changes.
•
•
63-2638
2
•
Auxiliary subbase contact typically interface
with a Honeywell Economizer System (for
total rooftop control integration) or act as
dehumidification output.
SETTINGS
Using Thermostat Keys
The thermostat keys are used to:
Features Available via PDA
Configuration
•
set current time and day,
•
program times and setpoints for heating and
cooling,
•
•
365 day clock with holiday programming.
Automatic Daylight Saving Time
adjustments.
Selectable dehumidification limit control.
Modulating output configuration.
Occupancy input to control standby setpoint.
Additional standby period used in low traffic
areas.
Sequential start option.
Discharge air high/low limits.
Selectable recovery ramp.
Ambient lockout (with outdoor sensor).
•
•
•
•
override the program temperatures,
display present setting,
set system and fan operation,
perform simple configuration.
•
•
•
•
NOTE: See Fig. 1 for keypad information.
Setting Temperature
Refer to Table 1 for default temperature
setpoints. See Programming section for
complete instructions on changing these.
•
•
•
•
3
63-2638
Table 1. Default Setpoints.
— Cool: Thermostat controls cooling.
— Off: Heating, cooling, and fan are all off.
— Heat: Thermostat controls heating.
— Em Heat: Auxiliary heat serves as first stage.
Compressor stages are locked off.
Control Occupied Not Occupied
Standby
Heating 70°F (21°C) 55°F (13°C)
Cooling 75°F (24°C) 85°F (29°C)
67°F (19°C)
78°F (26°C)
Fan Settings
Setting System and Fan
— On: Fan operates continuously in occupied
and standby periods. Fan cycles with call for
heat or cool during not occupied periods.
— Auto: Fan cycles with call for heating or
cooling during occupied, standby, and
not occupied periods.
System default setting is Auto. The fan default
is set so the fan operates continuously during:
— Occupied periods,
— Heating and cooling equipment stages in
Not Occupied and recovery periods.
NOTE: Use System and Fan keys to change
NOTE: This is further modified by selection of
conventional or electric heat.
settings.
System Settings
— Auto: Thermostat automatically changes
between heating and cooling based on
sensed indoor temperature.
63-2638
4
| General | Details |
|---|---|
| Name | Honeywell T7350 Programmable Thermostat Owner’s Manual |
| Make | Honeywell |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.25 MB |

Honeywell T6 Pro Programmable Thermostat User Manual

Honeywell D1-528 Direct Thermostat Installation Guide

Honeywell FocusPRO P200 Programmable Thermostat User Guide

Honeywell RCHT8610WF Series Smart Thermostat Installation Guide

Honeywell T9 Smart Thermostat Installation Guide

Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide

Honeywell TL116A Thermostat Installation Guide

T10 Pro Smart Thermostat with Redlink Room Sensor

Honeywell TH6320WF2003 Lyric T6 Pro Wi-Fi Programmable Thermostat User Guide

Honeywell RTH9580 Wi-Fi Color Touchscreen Programmable Thermostat User Guide

























