Honeywell RTH6500WF Wi-Fi Programmable Thermostat User Guide
Setting functions and options
You can change options for a number of system functions. Available functions depend
on the type of system you have. The functions, along with available options are
described on pages 18–19.
This thermostat is pre-set for a single-stage heating/cooling system.
Setting function 1 for a heat pump will adjust the default settings.
1
Press Fan and s simultaneously and hold
for approximately 3 seconds. The screen
will change to display two numbers and the
button designations will be Done, Back, blank,
Next.
HOLD
2
3
Press Next until you see the function number—
the larger number on the left—you want to set.
MCR33883
Change options for any function by pressing
s or t until the correct option (smaller
number on right) is displayed.
HOLD
4
5
Repeat Steps 2 and 3 until you have set all
functions that you wish to change.
MCR33884
When you have made all changes, press Done
to save and exit.
System setup
Function
Settings & Options
0
1
2
3
Heat/cool: Gas, oil or electric heating with central air conditioning.
Heat pump: Heat pump without backup or auxiliary heat.
Heat only: Gas, oil or hot water heat without central air conditioning.
Heat only with fan: Gas, oil or electric heat without central air
conditioning.
1
Select System
Type
If you are not sure
of your heating/
cooling system
type or have other
questions, go to
honeywellhome.
com
4
5
6
Cool only: Central air conditioning only.
Heat pump: Heat pump with backup or auxiliary heating.
Heat/Cool Multiple stages: 2 heat stages (wires on W and W2), 2
cooling stages (wires on Y and Y2).
Heat/Cool Multiple stages: 2 heat stages (wires on W and W2), 1
cooling stage (wire on Y).
7
8
Heat/Cool Multiple stages: 1 heat stage (wires on W), 2 cooling
stages (wire on Y and Y2).
0
1
Cooling changeover valve: Use this setting if you connected a wire
labeled “O” to the O/B terminal.
Heating changeover valve: Use this setting if you connected a wire
labeled “B” to the O/B terminal.
2
3
Heat Pump
Changeover Valve
(for heat pumps
only)
0
1
Gas or oil heat: Use this setting if you have a gas or oil heating system
(system controls fan operation).
Electric heat: Use this setting if you have an electric heating system
(thermostat controls fan operation).
Heating Fan
Control
69-2715EF—07
18
| General | Details |
|---|---|
| Name | Honeywell RTH6500WF Wi-Fi Programmable Thermostat User Guide |
| Make | Honeywell |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.05 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Honeywell T6 Pro Programmable Thermostat User Manual
Honeywell D1-528 Direct Thermostat Installation Guide
Honeywell FocusPRO P200 Programmable Thermostat User Guide
Honeywell RCHT8610WF Series Smart Thermostat Installation Guide
Honeywell T9 Smart Thermostat Installation Guide
Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide
Honeywell TL116A Thermostat Installation Guide
T10 Pro Smart Thermostat with Redlink Room Sensor
Honeywell TH6320WF2003 Lyric T6 Pro Wi-Fi Programmable Thermostat User Guide
Honeywell RTH9580 Wi-Fi Color Touchscreen Programmable Thermostat User Guide
White-Rodgers B50 Electric Heat Thermostat Installation Guide
tecnoswitch EN60730-1 Electronic Recessed Thermostat User Guide
sensi ST765470 Thermostat Installation Guide
Honeywell THR830T Homeexpert Room Thermostat Instruction Manual
DAIKIN One Lite Smart Thermostat User Guide
Puravent CFST Frost Thermostat Installation Guide
Honeywell CT8602 Programmable Thermostat User Guide
GENERAL Life SENNA 300 RF Wireless Room Thermostat User Guide
CONTEMPORARY CONTROLS BAST-421C-B2 BACnet Communicating Thermostat User Manual
White Rodgers 1F95-1277 Big Blue Universal Thermostat Instruction Manual