heatmiser neoStat-Pro Smart Thermostat Instruction Manual
Re-calibrating the Thermostat
If you need to re-calibrate the thermostat, follow these steps.
•
Press and hold the Up / Down keys for 10 seconds. The tick key will
blink once.......................................................................................................................
Use the Up / Down keys to change the offset...................................................
Tap the Tick button to store and return to the main display.......................
•
•
To remove any previously stored offset, a complete factory reset is required.
Error Codes
When terminated for thermostat operation the screen will display an error code if a fault
is detected.
E0 = The internal sensor has developed a fault.
E1 = The remote FLOOR probe has not been connected.
The remote FLOOR probe has not been wired correctly.
The remote FLOOR probe is faulty.
E2 = The remote AIR probe has not been connected.
The remote AIR probe has not been wired correctly.
The remote AIR probe is faulty.
neo
20
| General | Details |
|---|---|
| Name | heatmiser neoStat-Pro Smart Thermostat Instruction Manual |
| Make | heatmiser |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.52 MB |

heatmiser neoStat Touch-e Touchscreen Electric Floor Heating Thermostat Owner’s Manual

heatmiser Slimline-RF V3 Programmable Wireless Thermostat Instructions

heatmiser DS1-V2 Thermostat Owner’s Manual

heatmiser neoStat-e Electric Floor Heating Thermostat Instructions

heatmiser Slimline-B V3 Programmable Room Thermostat Owner’s Manual









































