Home > HBX > HBX THM-0500 Touch Screen Programmable Thermostat Instruction Manual

HBX THM-0500 Touch Screen Programmable Thermostat Instruction Manual

TROUBLESHOOTING GUIDE  
ISSUE  
POSSIBLE CAUSES & RESOLUTIONS  
Blank Screen  
• Check the ZON-0550 power  
• Check wiring polarity between the THM-  
0300/THM-0500 and ZON-0550 module.  
• Ensure zones 1 and 3 damper/4-pipe is set  
correctly.  
Stage 2 won’t  
come on  
• Check stage delay in system setup for  
proper time.  
• In special functions ensure you have  
selected correct thermostat type.  
Demand not  
coming on  
• Demands may take up to 5 minutes to  
operate due to P.I.D algorithm.  
• Verify wiring on the ZON-0550 module.  
• Check priorities settings in zone setup.  
• Check the changeover settings  
Temperature  
not displaying  
correct value  
• If it is showing dash lines ensure that the  
proper thermostat mode is selected in mode  
setup.  
• Ensure external sensor(s) is wired correctly.  
• Make sure the external room dipswitch on  
the board is in the correct position.  
Target  
• Check the setback schedule  
changing  
• If you’re in auto changeover, then the  
target can change to either heating target  
or cooling target based on actual room  
temperature.  
19  
GeneralDetails
NameHBX THM-0500 Touch Screen Programmable Thermostat Instruction Manual
MakeHBX
LanguageEnglish
FiletypePDF (Download)
File size0.52 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
HBX THM-0100 Programmable Thermostat Instruction Manual
HBX THM-0100 Programmable Thermostat Instruction Manual

HBX THM-0500 Touch Screen Programmable Thermostat Instruction Manual