Home > EPH CONTROLS > EPH CONTROLS CDTP2 Room Thermostat Instruction Manual
×
- 1. Room Thermostat (Installation And Operation Guide)
- 2. Installation Instructions (Factory Default Settings → Specifications → Lcd Display → Buttons → Wiring → Operating Instructions)
- 3. Adjust The Program Setting In 5/2 Day Mode (Temporary Override / Permanent Override → Boost Function → Menu Function → P0 1 Operating Mode → P0 2 Setting High & Low Limits → P0 4 Calibrate)
- 4. Mains Operated Programmable Room Thermostat (Installation Instructions)
- 5. Factory Default Settings (High And Low Temp Limitation → Keypad Lock → Operating Mode → Temperature Indicator → Frost Protection → Daylight Saving Time (dst))
- 6. Specifications (Power Supply / Input: → Operating → Temperature Range: → Ambient Temperature: → Contact Rating: → Dimensions: → Battery:)
- 7. Lcd Display (Displays When Setting Target Temperature. → Displays Current Room Temperature. → Displays Current Day Of The Week. → Displays Current / Target Temperature. → Displays When The Thermostat Is Calling For Heat. → Displays When Keypad Is Locked. → Displays Current Operating Mode.)
- 8. Buttons (Reset Button → Menu Button → Ok Button → Time +1h → Down Button → Up Button)
- 9. Wiring (Terminal Connections → Neutral In → Live In → N/c Normally Closed Connection → Common Connection → N/o Normally Open Connection)
- 10. Mounting & Installation (Caution! → Installation And Connection Should Only Be Carried Out By A Qualified Person. → Only Qualified Electricians Or Authorised Service Staff Are Permitted To Open The Thermostat. → If The Thermostat Is Used In A Way Not Specified By The Manufacturer, Its Safety May Be Impaired. → Prior To Setting The Thermostat, It Is Necessary To Complete All Required Settings Described In This Section. → Before Commencing Installation, The Thermostat Must Be First Disconnected From The Mains. → This Thermostat Can Be Mounted In The Following Ways:)
- 11. Remove The Thermostat From Its Packaging (Choose A Mounting Location → Wire The Thermostat According To The Diagram → Screw The Backplate Onto A Back Box → Close The Front Housing And Tighten The Fastening Screw)
- 12.
- 13. Mains Operated Programmable Room Thermostat (Operating Instructions)
- 14. Adjusting The Target Temperature (Locking The Keypad)
- 15. Auto (Backlight → Aut → Off → On → To Adjust The Backlight Setting)
- 16. Mode Selection (Auto → Off → Man)
- 17. Setting The Date, Time & Programming Mode (Holiday Mode)
- 18. How Your Programmable Thermostat Works (Auto Mode Operation → Programming Options → Setting Target Temperatures → Turning The Thermostat Off)
- 19. Factory Program Setting (Day → Hour)
- 20. Programming Modes (/2 Day Mode → Day Mode → Hour Mode)
- 21. Adjust The Program Setting In 5/2 Day Mode (Programming For Monday To Friday → Programming For Saturday To Sunday → Return To Automatic Mode → Jump To The Next Day)
- 22. Temporary Override (Permanent Override)
- 23. Boost Function
- 24. Menu Function (Operating Mode (normal / Optimum Start / Tpi))
- 25. Normal Mode (nor) (Graph (23.1): Normal Mode (on / Off Control))
- 26. P01 Operating Mode (Optimum Start Control (os) → Room Temperature (rt) → Setpoint Temperature (st) → Target Temperature Difference (ttd) → Optimum Start Time (ost))
- 27. Optimum Start Control Graph With Ti = 20 (Optimum Start Control Graph With Ti = 15 → Optimum Start Control Graph With Ti = 10 → Example When Ti = 20 → Example When Ti = 10 → Target Temperature Difference C)
- 28. Operating Mode (Time Proportional Integral Mode (tpi) → Cyc Number Of Heating Cycles Per Hour)
- 29. Pb - Proportional Bandwidth (Tpi Control)
- 30. P01 Operating Mode (Time Proportional Integral Mode (tpi))
- 31. Setting High & Low Limits (Hi 35c Lo 5c → Accessing The Setting → Selecting High Limit → Selecting Low Limit → Confirming Settings → Returning To Normal Operation)
- 32. Hysteresis Hon & Hoff (This Menu Allows The Installer To Change The Switching Differential Of The Thermostat When The Temperature Is Rising And Falling.)
- 33. Use & To Select The Hon Temperature, Press To Confirm. Hoff Will Appear On The Screen And The Differential Temperature Will Begin To Flash.
- 34. Calibrate
- 35. Resetting The Thermostat
- 36. Eph Controls Ie (Eph Controls Uk)
×
EPH CONTROLS CDTP2 Room Thermostat Instruction Manual
| General | Details |
|---|---|
| Name | EPH CONTROLS CDTP2 Room Thermostat Instruction Manual |
| Make | EPH CONTROLS |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.7 MB |

EPH CONTROLS eTRV-HW Smart Cylinder Thermostat User Guide

EPH CONTROLS eTRV-HW Smart Hot Water Thermostat Instruction Manual

EPH CONTROLS eTRV Smart Radiator Thermostat Instruction Manual

EPH CONTROLS 20221026 RFRA – RF Room Thermostat Instruction Manual

EPH CONTROLS CDTP2 Hardwired Room Thermostat Instruction Manual

EPH Controls CDT2-24 24V Room Thermostat Installation Guide

EPH CONTROLS RFCA RF Cylinder Thermostat Instruction Manual

EPH CONTROLS PR092K7 RF Cylinder Thermostat Instruction Manual

EPH CONTROLS COMBIPACK2 Smart Thermostat with Automation and Optimum Start Instructions

EPH CONTROLS CRT2 Room Thermostat Instruction Manual


expert4house BHT-18 AI Knob Thermostat User Guide

GENERAL LIFE MITRA 230S Digital Room Thermostat User Manual

heatit WiFi TRM3 Intelligent Smart Home Thermostat User Guide

homematic IP HmIP-BWTH-A Wall Thermostat Installation Guide

WYZE WTMSRS 3-in-1 Digital Room Sensor for Smart Thermostat User Manual

MYSON Unisenza Dial Thermostat User Manual

GENERAL LIFE Senna 270 Digital Room Thermostat User Manual

Danfoss TP5001B Programmable Room Thermostat User Guide

KETOTEK LL0269 WiFi Digital Heating Thermostat User Manual

Danfoss ECtemp 530 Electronic Thermostat Installation Guide
Table of Contents
- 1. Room Thermostat - Installation And Operation Guide →
- 2. Installation Instructions - Factory Default Settings →
- 3. Adjust The Program Setting In 5/2 Day Mode - Temporary Overr... →
- 4. Mains Operated Programmable Room Thermostat - Installation I... →
- 5. Factory Default Settings - High And Low Temp Limitation →
- 6. Specifications - Power Supply / Input: →
- 7. Lcd Display - Displays When Setting Target Temperature. →
- 8. Buttons - Reset Button →
- 9. Wiring - Terminal Connections →
- 10. Mounting & Installation - Caution! →
- 11. Remove The Thermostat From Its Packaging - Choose A Mounting... →
- 12. Page 12 →
- 13. Mains Operated Programmable Room Thermostat - Operating Inst... →
- 14. Adjusting The Target Temperature - Locking The Keypad →
- 15. Auto - Backlight →
- 16. Mode Selection - Auto →
- 17. Setting The Date, Time & Programming Mode - Holiday Mode →
- 18. How Your Programmable Thermostat Works - Auto Mode Operation →
- 19. Factory Program Setting - Day →
- 20. Programming Modes - /2 Day Mode →
- 21. Adjust The Program Setting In 5/2 Day Mode - Programming For... →
- 22. Temporary Override - Permanent Override →
- 23. Boost Function →
- 24. Menu Function - Operating Mode (normal / Optimum Start / Tpi... →
- 25. Normal Mode (nor) - Graph (23.1): Normal Mode (on / Off Cont... →
- 26. P01 Operating Mode - Optimum Start Control (os) →
- 27. Optimum Start Control Graph With Ti = 20 - Optimum Start Con... →
- 28. Operating Mode - Time Proportional Integral Mode (tpi) →
- 29. Pb - Proportional Bandwidth - Tpi Control →
- 30. P01 Operating Mode - Time Proportional Integral Mode (tpi) →
- 31. Setting High & Low Limits - Hi 35c Lo 5c →
- 32. Hysteresis Hon & Hoff - This Menu Allows The Installer To Ch... →
- 33. Use & To Select The Hon Temperature, Press To Confirm. Hoff ... →
- 34. Calibrate →
- 35. Resetting The Thermostat →
- 36. Eph Controls Ie - Eph Controls Uk →






































