Home > ENGO CONTROLS > ENGO CONTROLS E901WIFI Wireless Internet Thermostat User Guide
ENGO CONTROLS E901WIFI Wireless Internet Thermostat User Guide
7
8
4
Video tutorials
Installer settings
STEP 3 - CONNECT THE THERMOSTAT TO WI-FI
1
After installing the app and creating an account:
1
5 sec.
5 sec.
Press and hold the
button for 5 seconds.
To enter installer parameters press and hold button for 5 seconds.
5
In the app, select:
„Add Device”.
After finding the
thermostat, go„Add”.
2
Installation of the thermostat in the app
Make sure your router is within range of your smartphone. Make sure
you are connected to the Internet. This will reduce the pairing time of the
device. Use only Wi-Fi 2,4GHz network.
9
10
On your mobile device, make sure the ENGO Smart has access to permissions
(Location, Bluetooth, Nearby devices). Then turn on Bluetooth and Location.
Connect to 2.4GHz Wi-Fi network to which you want to assign the device.
Use
button to select SYNC parameter.
or
,
STEP 1 - DOWNLOAD ENGO SMART APP
Use
or . button to move between parameters.
Enter the parameter by . Edit the parameter using or
Confirm the new parameter value with the button.
.
Download the ENGO Smart app from Google Play or Apple App
Store and install it on your smartphone.
6
2
Powered By
Installer parameters
Select the Wi-Fi network in which Wait for the app to configure the
the thermostat will operate and thermostat with the selected Wi-Fi
Default
value
Pxx
Function
Value
Description
enter the password of this network.
network.
Connect the receiver to the power supply.
When first powered up, the red led will start flashing,
which means that devices are ready to be added to the application.
Go to step 7 (adding devices in the app). If the red LED on the receiver
is not flashing, proceed with the next steps.
Heating/Cooling
Selection
Cooling
GET IT ON
Confirm with button.
P01
Heating
7
11
12
1
2
SPAN 0,25°C
SPAN 0,5°C
Available on the
3
4
5
6
7
8
TPI for Underfloor Heating
TPI for Radiators
3
STEP 2 - REGISTER THE NEW ACCOUNT
P02 Control algorithm
1
TPI for Electrical Heating
SPAN 1,0°C
Using
or buttons choose YES and start the pairing process
on a new frequency by pressing the button .
To register a new account, please follow the steps below:
8
1
2
Go„DONE”.
Thermostat has been installed and
displays the main interface.
SPAN 1,5°C
5 sec.
SPAN 2,0°C
Press and hold button for 5 seconds.
If the thermostat indicates
wrong temperature, you
can correct it by 3.5°C
Offset
P03
-3.5°C
4
13
0°C
temperature
to + 3.5°C
The thermostat started to send a signal to find the receiver
(the symbol of the blinking antenna) and started the countdown with
the number 10 (min). The pairing process may take up to 10 minutes.
NO
NC
Normally Open type of relay
Normally Closed type of relay
24 hour
P04
P05
Relay type
NO
24h
12h
Clock format
Minimum
24h
9
12 hour
Use
or , button to choose APP
- add to application parameter.
Minimum heating / cooling
P06
P07
5°C - 20°C
5°C
When the blue LED on the receiver will light up, it means the device has been
correctly added to the application and is now connected to the Internet.
setpoint
temperature that can be set
Maximum heating / cooling
Click„Register”to create
new account.
Enter your e-mail address
to which the verification
code will be sent.
Maximum
5
20°C - 35°C
35°C
setpoint
temperature that can be set
Key sound Off
Key sound On
Disabled
When the orange LED stops blinking,
the devices have been paired on a new frequency.
3
4
NO
YES
NO
P08
P09
Key sound
YES
NO
10
Pairing process with the receiver
PIN Code
PLEASE NOTE! THERMOSTAT IS ALREADY PAIRED
WITH THE RECEIVER!
PIN
Enabled
Require a PIN to
NO
Function disabled
Function enabled
Confirm with button.
1
2
3
P10 unlock the keys
every time
YES
YES
6
Pairing with
SYNC
receiver function
NO
YES
NO
Function disabled
Function enabled
Function disabled
The thermostat will display the message„good”, which means that
the devices are successfully paired with each other. Thermostat will return
to the next APP parameter in the service menu (adding to application).
You can skip this step and return to the main menu
NO
NO
Pairing with
If you want to re-pair the receiver and thermostat with each other and
then add it to the application, make sure that the receiver is disconnected
from the power supply, and the switches on it are in the ON and AUTO
positions. Then connect the receiver to the power supply and wait a few
seconds. Next, move the left switch to the OFF position and back to the ON
position with a quick motion. The orange LED will start blinking, which
will confirm that the receiver has entered the pairing mode.
by clicking (OK) button a few times
APP
CLR
application
function
YES
Function enabled
Enter the verification
Then set the login
password.
WARNING! If the orange LED on the receiver has not stopped
blinking after 10 minutes, repeat the pairing process taking into
account the distance between devices, obstacles and interference.
code received in the email.
Remember that you
only have 60 seconds to
enter the code!
NO
No action
Use
or button to choose YES and confirm with (OK) button
to start the process of adding to the application. .
Clear settings
factory reset
NO
YES
Factory Reset
| General | Details |
|---|---|
| Name | ENGO CONTROLS E901WIFI Wireless Internet Thermostat User Guide |
| Make | ENGO CONTROLS |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.47 MB |
(1 votes, average: 5.00 out of 5)
Loading...
ENGO Controls EONE230W Internet Controlled Thermostat User Guide
ENGO CONTROLS EFAN-230W Fan Coil Thermostat User Guide
ENGO CONTROLS FAN-24W 24V Fan Coil Thermostat User Guide
ENGO CONTROLS EASY230W Non-Programmable Wired Thermostat User Guide
ENGO CONTROLS EONE230 Internet Controlled Thermostat User Guide
ENGO CONTROLS EONEBATW, EONEBATB Internet Controlled Thermostat User Manual
ENGO Controls E901WIFI Internet Wireless Thermostat User Guide
ENGO CONTROLS EONE-BATW, EONE-BATB Internet Controlled Thermostat User Guide
ENGO CONTROLS EFAN-24W Fan Coil Thermostat User Guide
ENGO CONTROLS EFAN-230W WIFI 230V Fan Coil Thermostat User Guide
Micro Air ETRV EasyTouch RV Thermostat Instruction Manual
emos P56201UF GoSmart Digital Room Thermostat Instruction Manual
GENERAL LIFE HT25S RF Wireless Room Thermostat User Manual
Science Equip CH1920-001 Magnetic Stirrer Hot Plate Thermostat Instructions
SALUS FC600 Fan Coil Thermostat User Guide
EPH CONTROLS CDC2 Cylinder Room Thermostat User Guide
Danfoss VICUX40F Icon Dial 230V Room Thermostat Installation Guide
White Rodgers 1E65-144 Non Programmable Electronic Digital Thermostat Instruction Manual
Danfoss ECtemp 530 Electronic Thermostat Installation Guide
tecnoswitch 60730-1 Electronic Recessed Thermostat User Guide