EMERSON 1F75C-11PR Programmable Thermostat Installation Guide
THERMOSTAT OPERATION
Set Current Time and Day
Note:Time icons will flash at initial power up or after a reset.
1.) Press Set Time
2.) Use or to adjust the hour
3.) Press Set Time to advance to set the minutes and day of the week
4.) Press Run/Hold when finished.
The default program is 5-1-1 Day, but can be setup as a 7-Day or Non-Programmable
thermostat (refer to the Installer Menu above)
• Hold Temperature (bypassing the schedule) – With the System switch set to Heat or
Cool, momentarily press the Hold button. Hold will be displayed. Use or to adjust the
temperature. The thermostat will hold the room temperature at the selected setting until
you press Run to start program operation again.
• Program Override (Temporary Hold) – Press or until the desired temperature is
displayed. The thermostat will override the schedule until the next programmed time
period with a minimum override of 2 hours. Then the thermostat will automatically revert
THERMOSTAT SCHEDULE / PROGRAMMING
For tips on programming your thermostat to receive
optimal comfort, convenience and energy savings go
to: thermostathelper.com
Energy Saving Factory Schedule
This thermostat is programmed with the energy saving settings shown in the table below for
all days of the week.
P1/Wake
P2/Leave
P3/Return
P4/Sleep
Heating Schedule 6:00 AM - 70°F
8:00 AM - 62°F
5:00 PM - 70°F
10:00 PM - 62°F
Cooling Schedule 6:00 AM - 78°F
8:00 AM - 85°F
5:00 PM - 78°F
10:00 PM - 82°F
Note: Thermostat can be programmed on or off the subbase
ENTERING YOUR PROGRAM
Set Current Time and Day
1. Press TIME button once. The display will show the hour only.
EXAMPLE:
2. Press and hold either or until you reach the correct hour and AM/PM designation
(AM begins at midnight; PM begins at noon).
3. Press TIME once again. The display window will show the minutes only.
EXAMPLE:
4. Press and hold either or until you reach the correct minutes.
5. Press TIME once again. The display will show the day of the week.
6. Press or until you reach the current day of the week.
7. Press RUN/HOLD once. The display will show the correct time, day, room temperature
and set-point temperature.
Enter Heating Program
1. Move the SYSTEM switch to HEAT.
2. Press PRGM once. “Mo Tu We Th Fr” (indicating weekday program) will appear in the
6
| General | Details |
|---|---|
| Name | EMERSON 1F75C-11PR Programmable Thermostat Installation Guide |
| Make | Emerson |
| Language | English |
| Filetype | PDF (Download) |
| File size | 2.45 MB |
(1 votes, average: 5.00 out of 5)
Loading...
EMERSON ST75W Sensi Touch Wi-Fi Smart Thermostat Installation Guide
EMERSON Thermostat Common Wire Kit SA11 Instruction Manual
EMERSON 1F75H-21PR Programmable Heat Pump Thermostat Instruction Manual
EMERSON 1D56-310 White-Rodgers Low Voltage Horizontal Mounting Thermostat Instruction Manual
EMERSON Programmable Touchscreen Thermostat Setup in E2 and Site Supervisor User Guide
EMERSON 1F76U-22WFB Series Sensi Lite Smart Thermostat Installation Guide
EMERSON 1F87U-42WF Sensi Smart Thermostat User Guide
EMERSON 1F83C-11NP Single Stage Thermostat Owner’s Manual
EMERSON 1F75P-21PR Display Thermostat Instruction Manual
EMERSON 1F75H-21NP Non Programmable Heat Pump Thermostat Instruction Manual
Honeywell T827 Series Heat Only Vertical Thermostat Owner’s Manual
FC610 Bandary Smart Thermostat Owner’s Manual
NT NetX X-Series Thermostat Installation Guide
emos P56211 Wireless Room Thermostat Instruction Manual
Wyze WTHERM Smart WI-FI Thermostat User Manual
4512673 Heatit ZM Thermostat 16A User Guide
Carrier EB-STATE3LTICB-01 lLite Smart Thermostat Instructions
Vine Smart Wi-Fi Thermostat with Nightlight TJ-225 User Guide
HIVE SLT3 Thermostat User Guide
PNI-CT40 Smart Wireless Thermostat User Manual