elko One Matter Thermostat Owner’s Manual
Setting the room temperature
The room temperature can be increased/decreased manually by pressing the
touch button on the thermostat.
•
•
Press the “+” button to increase the temperature setpoint.
Press the “–” button to decrease the temperature setpoint.
NOTE:
•
•
Temperature can be adjusted in 0.5°C increments.
Max. and Min. temperature setpoint which can be set is based for the limit
In P4, if floor sensor is fitted, device will be in room temperature with floor limits
mode.
If the room temperature equals or exceeds the setpoint, and the floor temperature
is below the lower limit (min. guard), a demand is created, heating the room to
warm the floor, and the demand LED flashes white at 1 Hz.
If the room temperature is lower than the setpoint and the floor temperature
exceeds the upper limit (max. guard), the demand should be 0, control output
should be prevented, and the demand LED flashes white at 1 Hz.
DUG_Matter Thermostat_ELKO-01
27
| General | Details |
|---|---|
| Name | elko One Matter Thermostat Owner’s Manual |
| Make | ELKO |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.83 MB |
(1 votes, average: 5.00 out of 5)
Loading...
ELKO EKO50107, EKO50108 Matter Thermostat Installation Guide
ELKO EKO07258 16A Smart ZB Thermostat User Guide
micro-Air EasyTouch 352 Thermostat User Manual
LUX PSPH521 Series Programmable Heat Pump Thermostat Instruction Manual
ECOSTAR AC7300 WiFi Programmable Thermostat User Guide
STELPRO ST252NPFF Non-Programmable Electronic Thermostat Owner’s Manual
resideo TH4110U2005 T4 Pro Programmable Thermostat User Manual
International Environmental GoldringFan Coil Digital Thermostat Installation Guide
MRCOOL MST04 Smart Thermostat Owner’s Manual
SALUS AT10 Pipe-Fitted Thermostat User Guide
GE APPLIANCES RAK190V 2 Way Energy Management Thermostat Instruction Manual
Honeywell FocusPRO TH6000 Series Programmable Thermostat Instruction Manual