elko One Matter Thermostat Owner’s Manual
User settings
You can configure LED brightness, sensor calibration, set point limit, and other
end user setting.
Based on the preset value set in Installer Level 1, the following parameters can be
configured:
Preset
Mode 1
Preset
Mode 2
Preset
Mode 3
Preset
Mode 4
System default option
Menu
Menu function
00 (0%)
1
2
0 (0.0° C)
(If external temperature sensing
probe is connected)
0 (0.0° C)
3
4
For room control (P1 and
P2) : 4° C
For floor control (P3 and
P4) : 10° C
For room control (P1 and
P2) : 30 ° C
For floor control (P3 and
P4) : 27° C
5
6
(disabled)
: The menu level apply to the preset.
: The menu level does not apply to the preset.
To access user setting menu (menu level 3):
1. Wake-up the thermostat by pressing any one touch button and then
simultaneously press "+" and "–" for 5 s. Once you enter user setting, the Wi-
Fi LED glows yellow, and left most menu level LED indicator glows white.
2. Navigate the menu item by pressing "+" or "–" touch button and then press
“O” touch button for > 1 s to confirm selection.
NOTE: If the thermostat remains inactive for 10 seconds during the process, it
will time out and exit the settings.
18
DUG_Matter Thermostat_ELKO-01
| General | Details |
|---|---|
| Name | elko One Matter Thermostat Owner’s Manual |
| Make | ELKO |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.83 MB |

ELKO EKO50107, EKO50108 Matter Thermostat Installation Guide

ELKO EKO07258 16A Smart ZB Thermostat User Guide































































