Home > ELKO > elko One Matter Thermostat Owner’s Manual

elko One Matter Thermostat Owner’s Manual

Minimum floor limit  
After setting floor probe type, you must set the minimum floor limit. It is lower limit  
of the floor sensor.  
To set floor limit:  
1. Select menu 52 by pressing O touch button for > 1 s to enter the settings.  
2. Press + or touch button on the device to set the minimum limit.  
3. Press the O touch button for > 1 s to confirm the selection.  
NOTE:  
The temperature limit ranges from 10° C to 39° C.  
Each “+/–” tapping will increase or decrease the temperature by 1° C.  
When the minimum floor limit is set, it changes the minimum floor control  
setpoint that can be set in the user settings, page 21.  
Maximum floor limit  
After setting minimum floor limit, you must set the maximum floor limit. It is upper  
limit of the floor sensor.  
To set maximum guard temperature:  
1. Select menu 53 by pressing O touch button for > 1 s to enter the settings.  
2. Press + or touch button on the device to set the maximum limit.  
3. Press the O touch button for > 1 s to confirm the selection.  
NOTE:  
The temperature limit ranges from 11° C to 40° C.  
Each “+/–” tapping will increase or decrease the temperature by 1° C.  
When the maximum floor limit is set, it changes the maximum floor control  
setpoint that can be set in the user settings, page 22.  
14  
DUG_Matter Thermostat_ELKO-01  
   
GeneralDetails
Nameelko One Matter Thermostat Owner’s Manual
MakeELKO
LanguageEnglish
FiletypePDF (Download)
File size0.83 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
ELKO EKO50107, EKO50108 Matter Thermostat Installation Guide
ELKO EKO50107, EKO50108 Matter Thermostat Installation Guide
ELKO EKO07258 16A Smart ZB Thermostat User Guide
ELKO EKO07258 16A Smart ZB Thermostat User Guide

elko One Matter Thermostat Owner’s Manual