Home > DELTA DORE > DELTA DORE Tybox 2300 Wireless Thermostat User Guide
DELTA DORE Tybox 2300 Wireless Thermostat User Guide
7. Installation help
7.1 Unpairing/re-associating the receiver with the transmiter
If there’s a fault, you may need to unpair a product and/or re-associate a new one.
Wireless reseting of the transmiter
1
2
3
mode
mode
mode
>3s
>3s
❶ On the Tybox, briefly press a
buton to wake up the display,
then press and hold both the
❷ The screen displays rF--
depending on the number of
associated receivers
❸ Briefly press the mode and +
butons at the same time.
The screen displays dF 0
mode and + butons for 3 seconds.
(e.g.: rF01 for a single receiver, rF02
for 2 receivers etc...).
(transmiter not yet associated).
If the receiver is supplied with power
and is within the wireless range of
the transmiter at the time of the
reset, the transmiter will also be
deleted on the receiver.
Press - for 3 seconds to confirm
the reset.
The screen displays rF00.
Removing associations from the receiver
The deletion of wireless associations with the receiver is carried out by holding down the buton.
The LED will cycle through the various states.
> 30s
A
3s
B
10s
C
20s
D
30s
: The LED flashes red. The receiver is in pending association mode.
: The red LED flashes rapidly. The receiver is waiting to delete the association with a door/window magnetic
contact (check on the device you want to unpair).
: The red LED turns off. All associations with the receiver are now removed.
: If you hold down the buton for 30 seconds, the LED flashes 3 times.
The receiver is fully reset (back to factory setings).
Associating the receiver(s) with the transmiter
1
OFF
>3s
mode
mode
mode
... ... ...
3
4
2
>3s
The green LED light on the receiver
❷ On the Tybox, briefly press a
❹ Check that the LED of the
flashes rapidly, indicating that it has buton to wake up the display, then
receiver(s) is no longer flashing.
To exit the mode, briefly press the
mode and + butons simultaneously.
not been associated (if you have
press and hold both the mode and +
butons for 3 seconds.
proceeded with reseting it).
The screen will display rF00. Release.
❶ To associate it, press the receiver
buton for 3 seconds, until the red
LED flashes. Release.
❸ Press briefly on +. The screen
flashes until rF is displayed
depending on the number of
associated receivers (eg. rF01 for a
single receiver, rF02 for 2 receivers
etc.).
7
| General | Details |
|---|---|
| Name | DELTA DORE Tybox 2300 Wireless Thermostat User Guide |
| Make | DELTA DORE |
| Language | English |
| Filetype | PDF (Download) |
| File size | 9.23 MB |
(1 votes, average: 5.00 out of 5)
Loading...
DELTA DORE TYBOX 1127 Programmable Thermostat User Guide
DELTA DORE TYBOX 1117 Programmable Thermostat User Guide
DELTA DORE Tybox 5701FP Pilot Wire Thermostat User Guide
DELTA DORE Tywell 2050 Thermostat D’Ambiance Radio Installation Guide
SUNSKY BHT-006 Series Thermostat Instruction Manual
SALUS RT310i Internet Thermostat Installation Guide
TRANE SC360 Link System Controller and Smart Thermostat Instructions
WARMZONE LED WiFi Floor Heating Thermostat Owner’s Manual
White Rodgers 1F72 5 2 Day Programmable Thermostat Instructions
ise KNX RF Multi Radiator Thermostat Instructions
GENERAL LIFE Solara 330S Wired Room Thermostat User Manual
Munters RDT-5 Triple Phase Digital Thermostat User Manual
Vaillant VRC 700 Programmable Weather Compensating Thermostat Owner’s Manual
OJ ELECTRONICS MCD3 Digital Thermostat Instructions