GENERAL LIFE Solara 330S Wired Room Thermostat User Manual

1

2

ProductDisplayLayout  

As shown in the picture above, press the screwdriverforward from the space  

shown, bend the tabs and separate the front cover. Insert 2 new AAA alkaline  

batteries in the battery housing with the correct battery direction. Replace  

both batteries at the same time. Then align the front part of your Room  

Thermostatto thebackand squeezeittowards theback.  





Numbers indicate the following days respectively 2-Tuesday, 3-Wednesday,  

4-Thursday, 5-Friday, 6-Saturdayand 7-Sunday  

ENGLISH  

When setting is done, you may exit by pressing the “Weekly Program”  

button for 3 seconds.  

7

8

9

1

2

DIGITAL ROOM THERMOSTAT  

MODE SETTING  

Low Battery Warning: When the “  

” icon appears on the screen, it means  

generallife.com.tr  

MODES  

“low battery warning”. It is recommended to replace the batteries when this  

warning appears.  

10  

11  

12  

PRESET MODES  

WEEKLY  

PROGRAM  

MODE  

MANUAL MODE  

Warning: When the product is not used for a long period (more than 15 days),  

remove the batteries. Otherwise, malfunctions that may occur would be out  

of warranty. Please throw your dead batteries into the waste bin for  

batteries.  

3

4

5

6

SOLARA 330S USER MANUAL  

Comfort Economy  

Mode Mode  

Holiday  

Mode  

GENERAL SPECIFICATIONS  

SOLARA 330S is  

1

Hour Indicator  

a

wired room thermostat. The user can get more  

ROOM THERMOSTAT WIRING DIAGRAM  

Your Room Thermostat has 5 different modes. 3 of them (Comfort, Economy  

and Holiday Mode) are preset modes. Other modes are manual mode and  

weeklyprogram mode.  

2

Room Temperature  

Economy Mode  

Comfort Mode  

comfortable and economic heating/cooling by adjusting the room  

thermostatwiththerequired temperature.  

3

HEATING/COOLING UNIT  

4

 Dailyand WeeklyProgramming  

5

Holiday Mode  

In preset modes, temperature values are based on user's choices which have  

been set in the beginning. Manual mode allows the Room Thermostat to  

operate within the temperature which is required and set directly by user.  

Weekly Program mode continues to work according to the weekly schedule  

determined bytheuser.  

 Different Mode Options (Comfort, Economy, Holiday)  

6

Weekly Program Mode  

Day Indicator  

Screen Lock  

 Heating Calibration  

ON/OFFControl  

TPIAlgorithm  

Wired Connection  

7

 Heating/Cooling Option  

8

 PreciseTemperature Measurement  

9

10  

Battery Indicator  

Set Temperature  

In order to change thetemperaturevaluesof presetmodes:  

SOLARA 330S and EQUIPMENTS  

NO COM  

Heating Indicator  

- If the Heating Indicator is blinking, the heating unit is  

working.  





Press and hold the “Mode” button for  

Thermostatis on.  

3

seconds while your Room  

SOLARA 330S  

Room Thermostat  

Alkaline Battery  

Dowels and Screws  

11  

12  

Warning!  

Operations within the heating / cooling unit or the electrical installation  

must be carriedout byprofessionally qualified persons.  

Comfort Mode temperature value will appear. You may adjust the  

temperature value of Comfort Mode by pressing the “Up” and “Down”  

buttons.  

- If the Heating Indicator is steady, the heating unit is not  

working.  

Cooling Indicator  

- If the Cooling Indicator is blinking, the cooling unit is  



When setting is done, you may adjust the temperature value of Economy  

Mode with the “Up” and “Down” buttons by pressing the “Mode” button  

again.  

ROOM THERMOSTATTEMPERATURE CALIBRATION  

Temperature sensors which are used in Room Thermostats are highly  

sensitive. You mayneed to calibrate yourRoom Thermostat if youwould like  

to get the same temperature values with other thermometers in your living  

space.  

working.  

- If the Cooling Indicator is steady, the cooling unit is not  

working.  





You mayexitthesettingscreen bypressing the“Mode”button 3 seconds.  

In order to change the manual mode temperature, press the “Up” or “Down”  

button while in the main screen. The Room Thermostat will switch to  

ManualMode once pressedthe“Up” or “Down”button.  

You maypressthe“Mode”button to switchto theother modes.  

TECHNICAL DATA  

ROOM THERMOSTAT PLACEMENT  



While your device is turned off, press and hold the “On/Off“ button for 3  

seconds.  

Room Thermostat needs to be placed in the room which is used most  

frequently. For instance; living room or lounge. Placing the Room  

Thermostat in a spot that have air circulation like entrance of a room or side  

of window should be avoided. Also anywhere close to heating/cooling units  

such as radiator, stove and spots which get direct sun lights would not be  

suitable. Room Thermostat needs to be located above the floor 150 cm  

height. Fewtrialsmaybe made to find themost convenientspot.  

Dimensions  

Operating Current  

Relay NO Switching Current  

85mm / 125mm / 20mm  



3V DC (2 x AAA alkaline battery)  

2A/30VDC (Resistive load)  

0.5A/125VAC (Resistive load)  



Press the "On/Off" button until the “  

” menu appears. In order to see  

WEEKLY PROGRAM  

the desired temperature, set the temperature difference by pressing the  

“Temperature Adjustment Buttons”. This value can be arranged between  

“-8°C" and “+8° C".  

Temperature Measurement Accuracy 0.1^oC  

You may set the operating schedule of your Room Thermostat with weekly  

program mode. 7 different temperature values can be set for each day in  

weekly programming. These values can be set in temperature adjustment  

screens '' P0-P6''.  

Operating Temperature Range  

Battery Life  

(5^oC) – (30^oC)  



In order to save the settings and exit, press the "On/Off" button until the  

deviceturns off.  

1 Year (2 x AAA)  

(-10^oC) – (+50^oC)  

(-20^oC) – (+60^oC)  

Operating Temperature  

Storage Temperature  



In order to set the weekly schedule, press and hold the “Weekly Program“  

button for 3 seconds while your Room Thermostat is on. The “Hour, Minute  

and Day” setting will appear. Press the “Heating & Cooling Option” button  

until the“WeeklyProgram”menu (P0)appears.  

Note:Recommended temperature calibration is “0.0°C”.  

min. 20 cm  

FACTORY SETTINGS RESET  

You can reset your Room Thermostat to its default factory settings. This  

operation resets the mode temperature values, calibration setting,  

heating/cooling modes and hysteresis settings to factory setting. In order  

to resetyourRoom Thermostatto factory setting:  

ROOM THERMOSTAT  

ButtonFunctions  



Days of the week will be blinking on the screen. You can initiate the weekly  

program setting if you wish to set the same schedule for every day of the  

week.  







Press the “Up“ button once if you wish to set the same schedule for the  

weekdays. Firstfivedaysof weekwillbe blinking on thescreen.  

Press the “Up“ button once more if you wish to set the same schedule only  

for theweekend. Lasttwodaysof theweekwillbe blinking on thescreen.  

Press the “Up“ button one more time if you wish to set the same schedule  

for every day of the week. 1st day of the week will be blinking on the screen.  

You can switch between the days by pressing the “Up“ button. Press the  

“Down“button in order to switchto thepreviousday.  



While your device is turned off, press and hold the “On/Off” button for 3  

seconds.  

1

2

3

4

5

6





Pressthe“On/Off” button untilthe“  

” menu appears.  

While in the “ ” menu, select the “ ” option by using the “Up” or “Down”  

buttons and pressthe“On/Off” button.  



Your devicewill be turned off and resetto factory settings.  

KEY LOCK  

In the Room Thermostat there is a key lock function to avoidany unintended  

contact.  





Pressthe“WeeklyProgram“button once to setaschedule.  

“P0” will be blinking on the screen. Set the temperature value of “P0” by  

pressing the “Weekly Program“ button once more. The hour setting of “P0”  

cannot be changed sinceit's factory setting.  

In order to unlock the Room Thermostat's key lock the “On/Off” button  

should be pressed for 3 seconds. If buttons on Room Thermostat are not  

touched for 10seconds, keylock will be reactivated.  

BATTERY PLACEMENT  

Before starting, power off the device connected to the Room Thermostat  

and makesurethatthe energy is cut off.  

1

2

3

4

5

6

Weekly Program Button  

Heating & Cooling Option  

Mode Button  





Press the “Weekly Program” button again. Day indicator will be blinking. If  

you will not change the day, press the “Weekly Program” button again and  

switchto the“P1” settingbypressing the“Up” button.  

Temperature Adjustment Button (To Increase)  

Temperature Adjustment Button (To Decrease)  

On/Off Button – Unlock Button  

DAY AND HOUR SETTINGS  

First, hour setting will appear on the screen. Once you complete the hour  

setting, adjust the minute setting by pressing the “Weekly Program”button.  

After the minute setting, press the “Weekly Program” button to set the  

temperaturevalue.  







While your Room Thermostat is on, keep pressing the “Weekly Program”  

button for 3 seconds.  

At the first screen that appears, hour part will be blinking. You may set the  

timewiththe“Up” and“Down” buttons.  





Follow thesamestepsfor other schedule settings.  

After setting the time, the “Heating & Cooling Option” button needs to be  

pressed once. For minute setting, minute part will be blinking. You mayset  

theminute withthe“Up” and“Down” buttons.  

Once all changes made, press and hold the “Weekly Program” button for 3  

seconds to save.  





After setting the minute, the “Heating & Cooling Option” button needs to  

be pressed once to setthe dayof theweek.  

Note: In order to check the weekly schedule which has been set without  

making any changes, press the “Weekly Program” button once while your  

Room Thermostat is on. Press the “Up” and “Down” buttons to see the days,  

pressthe“Mode”button to seethesettingsbetween“P0-P6”.  

Mondayhas setasthefirstdayof theweekand indicated withnumber“1".  

1

2

3

4

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	GENERAL LIFE Solara 330S Wired Room Thermostat User Manual
Make	GENERAL LIFE
Language	English
Filetype	PDF (Download)
File size	2.06 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• GENERAL LIFE

GENERAL LIFE Solara 330S Wired Room Thermostat User Manual Overview

Summary of Contents

• Page 1: Product display layout Insert 2 new AAA alkaline batteries in the battery housing with the correct battery direction. When setting is done, you may exit by pressing the “Weekly Program” button for 3 seconds. Low battery warning: when the icon appears on the screen, it means low battery warning. Your Room Thermostat has 5 different modes: Comfort, Economy, Holiday, Manual mode, and Weekly Program mode. In preset modes, temperature values are based on user's choices which have been set in the beginning. Room Thermostat needs to be placed in the room which is used most frequently. You can reset your Room Thermostat to its default factory settings. In order to set the weekly schedule, press and hold the “Weekly Program“ button for 3 seconds. In the Room Thermostat, there is a key lock function to avoid any unintended contact. Before starting, power off the device connected to the Room Thermostat and make sure that the energy is cut off.
• Page 2: Warranty certificate The warranty period starts from the invoice date and is warranted against manufacturing defects for 5 years. Your room thermostat works with the TPI algorithm, predicting temperature changes to maintain the set temperature with minimal deviation. If the placement of the TPI room thermostats is changed, the learning process will restart and should be considered as 7 days. Devices and apparatus are delivered to the customer in working condition. The repair of devices covered by the warranty is carried out in the company factory. Malfunctions resulting from improper use are not covered by the warranty. The customer can request a replacement or repair of devices with manufacturer-induced errors during the warranty period. The warranty document must be kept by the customer during the warranty period. The customer can make complaints and appeals to consumer courts or consumer arbitration committees. Isıpark reserves the rights to change product specifications and user manuals.