EAE TECHNOLOGY KNX ORIA Thermostat Installation Guide

1

Installation Manual ORIA  

EAE KNX ORIA Thermostat Series  

Oria Thermostat IM R3.0  

Operation and Display  

Installation  

Installation of the product is done  

with the help of the flange which  

is inside the box. The flange is  

fixed to the junction box by using  

screws while the arrows on flange  

are headed to up. The switch is  

placed into the junction box by  

positioning the EAE logo upwards  

and then reclining it to the flange.  

The switch is slowly turned  

clockwise to give the right  

position to it on the flange. After the clicks are on the right position, switch  

is turned counter-clockwise to lock it on the flange.  

1. Programmable Button Group 1  

2. Fan Speed (1, 2, 3, Auto)  

3. Operation Mode (Comfort, Night, Away, OFF)  

4. Setpoint Temperature Up  

1. KNX Port Terminal  

2. Programming Button  

3. Programming LED  

5. Setpoint Temperature Down  

6. Programmable Button Group 2  

Description of the Device  

Commissioning  

• Temperature Adjustment on Digital LCD  

• Integrated Temperature Sensor (°C/ °F )  

• Integrated Humidity Sensor  

• Fan Speed Adjustment (1, 2, 3, Auto)  

• Different Operation Modes (Comfort, Night, Away, OFF)  

• Fully Automatic Function Mode (hot-cold transition)  

• Control Flexibility for all HVAC units including VRF-VRV and AC  

• PI rational, PI on-off (PWM), On/Off, Fan coil, Split unit controls  

• Easy mount into 60x60 mm standard switch junction boxes  

• Up to 4 fold (8 buttons) buttons can be programmed individually  

Device default physical address is 15.15.255. Determination of the  

physical address and setting of parameters are actualized with  

Engineering Tool Software (ETS5 or higher). “.knxprod” file must be  

imported to the ETS. (http://www.eaetechnology.com/)  

A detailed information about parameter configuration can be found  

in Product Manual of device.  

Installation and commissioning of device may only be implemented  

by trained electricians. The relevant standards, directives, regulations  

and instructions must be observed when planning and implementing the  

electrical installation.  

▪ Switching  

▪ Dimming  

▪ Shutter/Blind  

▪ Value  

▪ Scene control  

▪ Status  

-Protect the device against moisture, dirt and damage during transport,  

storage and operation!  

-Do not operate the device out of the specified technical data which is  

stated.  

Technical Data  

Type of protection  

Safety class  

IP 20  

II  

EN 60 529  

-The device may only be operated in closed enclosures (Distribution  

boards)  

EN 61 140  

Voltage  

21 V… 30 V DC SELV  

≤ 10 mA  

KNX Supply ⁽¹⁾  

Current Consumption  

KNX  

Cleaning  

If device becomes dirty, only a dry cloth can be used for cleaning. İt is not  

suitable to use wet cloths, caustics and solvents.  

Connections  

Installation  

Bus connection terminal  

60x60 mm standard box  

Ambient  

-5° C + 45° C  

-25° C + 55° C  

±0,3 °C  

Temperature range  

Storage  

Measurement accuracy  

Max. air humidity condensation  

Humidity  

95 % no moisture  

90x90 mm  

90x112 mm  

90x133 mm  

8,5 mm  

Dimensions  

Front face (2 fold)  

Front face (3 fold)  

Front face (4 fold)  

Side- Surface of plaster  

Side- Under plaster  

29,5 mm  

Box  

CE  

Plastic, polycarbonate  

In accordance with the EMC  

guideline and low voltage  

Application Program Communication Object  

Number of Addresses(max)  

50  

254  

255  

Number of assignments(max)  

© EAE Technology  

Ikitelli Org.San.Bolg. Ziya Gokalp Mah. Eski Turgut Ozal Cad.  

No: 20 34490 Basaksehir/Istanbul Tel: +90 212 549 97 13  

www.eaetechnology.com  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	EAE TECHNOLOGY KNX ORIA Thermostat Installation Guide
Make	EAE Technology
Language	English
Filetype	PDF (Download)
File size	0.12 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• EAE Technology

EAE TECHNOLOGY KNX ORIA Thermostat Installation Guide Overview

Summary of Contents

• Page 1: Installation of the product is done with the help of the flange which is inside the box. The flange is fixed to the junction box by using screws while the arrows on flange are headed to up. The switch is placed into the junction box by positioning the EAE logo upwards and then reclining it to the flange. Temperature adjustment on digital LCD is possible with an integrated temperature sensor. The device features an integrated humidity sensor and fan speed adjustment options. Different operation modes include Comfort, Night, Away, and OFF. The device supports control flexibility for all HVAC units including VRF-VRV and AC. Installation and commissioning of the device may only be implemented by trained electricians. The device may only be operated in closed enclosures (Distribution boards). If the device becomes dirty, only a dry cloth can be used for cleaning. The maximum air humidity for operation is 95% with no moisture.