Home > EAE Technology > EAE Technology EAE-KNX MONA Series Thermostat Instruction Manual
EAE Technology EAE-KNX MONA Series Thermostat Instruction Manual
Installation Manual MONA Series
EAE KNX MONA Thermostat
MONA Thermostat R0
Device Descrip�on
Installa�on
MONA premium thermostat
series create a natural harmony
and adds value to your interior
designs with elegant look and
sophis�cated technology. It is
used to control the HVAC systems
including control the switches,
dim the lights, ac�va�ng scenes,
control blinds and vice versa.
Installa�on of the product is done with metal flange. It is fixed to the
junc�on box by using screws. The switch has magnets and should be
posi�oned the screen upwards. The device will s�ck on flange via
magne�za�on. Mul�ple devices can be combined up to 3.
NOTE: Distance between center of flanges is 71 mm.
•
•
•
•
•
Monoblock glass design
60x60 mm easy moun�ng to standard junc�on boxes.
Different glass color op�ons
Configurable RGB illuminated bu�ons
Up to 6 independent programmable bu�ons
. Switching
. Dimming
. Shu�er/Blind
. Value
. Scene control
. Status no�fica�on
Opera�on and Display
7
8
5
6
9
1
4
1. KNX Port Terminal
2. Programming LED
3. Programming Bu�on
4. Control Bu�ons
6. Opera�on Mode Bu�on
(Comfort, Night, Away, Protec�on)
7. Setpoint Temperature UP
8. Setpoint Temperature DOWN
9. Built-in Screen
Commissioning
Device default physical address is 15.15.255. Determina�on of the
physical address and se�ng of parameters are actualized with
Engineering Tool So�ware (ETS4 or higher). “.knxprod” file must be
5. Fan Speed (1, 2, 3, Auto)
Technical Data
Protec�on Type IP20
II
EN 60 529
EN 61 140
Bus Connec�on
21V… 30V DC, KNX
<21mA
Addr Prog.LED
Bu�on Status LEDs
-5° C + 45° C
-25° C + 55° C
±0,3 °C
A detailed informa�on about parameter configura�on can be
found in Product Manual of device.
Safety Class
Connec�ons
KNX
Voltage
Installa�on and commissioning of device may only be
implemented by trained electricians. The relevant standards,
direc�ves, regula�ons and instruc�ons must be observed when
planning and implemen�ng the electrical installa�on.
Power Supply
Current drawn from bus
LED (red)
LED (white)
Opera�ng
Elements
Opera�ng
Temperature
Temp. Sensor
Ambient
Storage
Measurement Accuracy
-Protect the device against moisture, dirt and damage during
transport, storage and opera�on!
Humidity
Max. Air humidity
Front side
95% no moisture
90 x 100 mm
12 mm
-Do not operate the device out of the specified technical data which is
stated.
Dimensions
Side – Surface mounted part
Side – Flush mounted part
65 g
18.8 mm
Weight
-The device may only be operated in closed enclosures (Distribu�on
boards)
Glass – Surface
Polycarbonate – Flush mounted part
Front Side – Glass – Black or White
Flush mounted part – Polycarbonate - Black
In accordance with the EMC guideline and low voltage
direc�ves
Box Material
Color
CE
Cleaning
If device becomes dirty, only a dry cloth can be used for cleaning. İt is
not suitable to use wet cloths, caus�cs and solvents.
© EAE Technology
| General | Details |
|---|---|
| Name | EAE Technology EAE-KNX MONA Series Thermostat Instruction Manual |
| Make | EAE Technology |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.23 MB |
(1 votes, average: 5.00 out of 5)
Loading...
EAE TECHNOLOGY KNX ORIA Thermostat Installation Guide
EAE Technology EAE-KNX MONA Manual: Questions and Answers
EAE Technology EAE-KNX MONA specifications
| Accuracy | ±0,3 °C |
| Operating temperature | -5° C + 45° C |
| Storage temperature | -25° C + 55° C |
| Weight | 65 g |
Where are the programming button and LED located on this thermostat?
The programming LED is at position 2 and the programming button at position 3 on the front face. Instruction Manual, p. 1
What is the voltage requirement for EAE Technology EAE-KNX MONA?
21V to 30V DC, with current drawn from the KNX bus under 21mA. Instruction Manual, p. 1
Can I mount multiple EAE Technology EAE-KNX MONA units side by side in the same junction box?
Yes, up to 3 devices can be combined. The distance between the center of flanges must be 71 mm. Instruction Manual, p. 1
How do I install EAE Technology EAE-KNX MONA to a standard junction box?
Use the metal flange with screws. Position the screen upwards. The device attaches to the flange via magnetization.
- Fix the metal flange to the junction box with screws.
- Orient the screen to face upward.
- The device will stick to the flange magnetically. Instruction Manual, p. 1
More EAE Technology thermostat manuals
tuya Mi-750 WiFi Smart Thermostat Instruction Manual
ESi Controls ESRTP4TOUCH Programmable Room Thermostat Instruction Manual
GENERAL MITRA 250S Smart Room Thermostat User Manual
ENGO CONTROLS SE901WIFI Wireless Internet Wi-Fi Thermostat User Guide
hansgrohe 10717000 AXOR STARCK X Highflow Concealed Thermostat Instruction Manual
DEVIreg 610 Electronic Thermostat Installation Guide
DAIKIN DKN510 Wireless VRV Communicating Thermostat Installation Guide
CENTER EHE0200322 RF Wireless 7 Day Programmable Thermostat Installation Guide
BEOK TDR89 Glass Screen Thermostat Instruction Manual
Roth VVS-nr. 466397.058 Softline Standard Room Thermostat Instruction Manual